460 Каталог KYOCERA 2017 Инструмент сборный и монолитный для станков Стр.G99

Каталог KYOCERA 2017 Инструмент режущий Стр. G99 0460 Lab2u

Toolholder Dimensions For KFMS& 5 toolholder can hold a 6mm width insert. value shows the dimension of a 6mm width insert. Selection of Toolholder & Insert Toolholder Left-hand (L) Insert (Neutral) ll N \\ / / O rj > o o 5 Applicable Inserts (mm) Description Обозначение L H FMM30-03 t FMM60-04 12 3.5 FMN3 FMN6 12 3.5 M K N S Carbon steel / Alloy steel Stainless Steel Non-ferrous Metals Titanium Alloys Hard materials ( 40HRC) Hard materials (40HRC ) o Classification of usage M : Continuous-Light Interruption / 1st Choice O : Continuous-Light Interruption / 2nd Choice : Continuous / 1st Choice O: Continuous / 2nd Choice Insert Description Обозначение Dimension (mm) Размеры в мм PVD Coated Carbide W M Applicable Toolholders Face Grooving Chip Control Oriented IM Class FMM 30-03 3.0 0.3 2.0 40-04 4.0 2.6 50-04 5.0 0.4 3.4 60-04 6.0 4.0 KFMS& KFMS& KFMS& Face Grooving Sharp-Cutting Oriented / M Class FMN 3 3.0 2.0 KFMS& 4 4.0 3 =CU 5 5.0 0.25 2.6 KFMS& 3.4 6 6.0 4.0 KFMS& 5 FMN type inserts are only for Deep Grooving and not applicable for Turning. Recommended Cutting Conditions Рекомендованные режимы резания на станкахO G105 Limit of Turning toward Center Turning towards the Center causes the toolholder to interfere with the groove wall depending on the initial cut's diameter. 25 26 27 28 and over Description Обозначение d(mm) J KFMS& KFMS& 2020K2530-3 2525M2530-3 4 2 0 0 Interference / KFMS& KFMS& 2020K2535-4 2525M2535-4 6 3 0 (No Remaining Boss Dia. d KFMS& KFMS& 2020K2535-5 2525M2535-5 7 (5) 4 (2) 1 (0) Boss) e.g.) KFMSR 2525M2530-3 with 25 as first cut towards the center, it will cause a rubbing with the toolholder cartridge if d is 4.0mm. value shows the Dimension using FMM60-04 Insert. : Std. Item Стандартная позиция Inserts are sold in 10 piece boxes. G99 p H 3 4 5 3 4