536 Каталог KYOCERA 2016 Инструмент режущий станочный Пластины Резцы Фрезы Сверла Стр.J42

Каталог KYOCERA 2016 Режущий инструмент для станков Стр. J42 0536 Lab2u

Threading Applicable Toolholders & Inserts In Applicable Toolholder / Insert Lists on J42 J45, Right-hand Insert / Right-hand Toolholder descriptions are listed based on the previous TNN type inserts. For other applicable inserts / toolholders or stock availability of Left-hand, see each relevant page and J48. Parallel Pipe: G(PF), Rp(PS) Nominal Thread TPI External Thread (G) Internal Thread (G,Rp) Same Root’s Radius Symbol (Previous Symbol) Toolholder Insert Toolholder Insert Bore Dia. Partial Profile Full Profile Partial Profile Full Profile G 1/16 (-) 28 KTNROOOO -16 KTNSROOOO -16 16ERA55-TF 16ERAG55-TF 16ERA55 16ERAG55 - SINR0612S-06E (EZTG J24) (HPT4 J28) 06IR5501 - 6.56 0.12 G 1/8 (PF %) 8.57 G 1/4 (PF 1/4) 19 KTNROOOO -16 KTNSROOOO -16 16ERA55-TF 16ERAG55-TF 16ERA55 16ERAG55 16ER19W-TF 16ER19W SINR0816S-08E (EZTO J24) (HPT4 J28) 08IR5501 - 11.45 0.18 G % (PF =/8) SINR1216S-11E (EZT4 J24) (HPT4 J28) 11IRA55 11IR55005 - 14.95 G 1/2 (PF 1/2) 14 KTNROOOO -16 KTNSROOOO -16 16ERAG55-TF 16ERG55-TF 16ERAG55 16ERG55 16ER14W-TF 16ER14W SINR1516S-11 11IR55005 - 18.63 0.25 SINR1616S-16 16IRAG55 16IRG55 16IR5501 16IR5502 16IR14W-TF 16IR14W G 58 (PF %) SINR2016S-16 20.59 G 3/4 (PF 3/4) 24.12 G 7/8 (PF %) SINR2420S-16 27.88 G 1 (PF 1) 11 KTNROOOO -16 KTNSROOOO -16 16ERAG55-TF 16ERG55-TF 16ERAG55 16ERG55 16ER11W-TF 16ER11W SINR2420S-16 16IRAG55 16IRG55 16IR5501 16IR5502 16IR11W-TF 16IR11W 30.29 0.32 G 11/8 (PF 11/8) CINR3025S-16 34.94 G 11/4 (PF 11/4) CINR3732S-16 38.95 Hereafter, all the threads are 11 TPI and the root’s radius 0.32. The same tool for G11/4 is recommended. Tapered Pipe: R, Rc (PT) (BSPT) Nominal Thread TPI External Thread (G) Internal Thread (Rc) Same Root’s Radius Symbol (Previous Symbol) Toolholder Insert Toolholder Insert Partial Profile Full Profile Partial Profile Full Profile R i/6,Rc 1/46 (-) 28 KTNROOOO -16 KTNSROOOO -16 (16ERA55-TF) (16ERAG55-TF) (16ERA55) (16ERAG55) 16ER28BSPT-TF 16ER28BSPT SINR0612S-06E (EZTG J24) (HPT4 J28) 06IR5501 - 0.12 R V8,Rc i/8 (PT 1/8) R 1/4,Rc 1/4 (PT 1/4) 19 KTNROOOO -16 KTNSROOOO -16 (16ERA55-TF) (16ERAG55-TF) (16ERA55) (16ERAG55) 16ER19BSPT-TF 16ER19BSPT SINR0816S-08E (EZTG J24) (HPT4 J28) 08IR5501 - 0.18 R %,Rc % (PT =/8) SINR1216S-11E (EZTO J24) (HPT4 J28) (11IRA55) (11IR55005) 11IR19BSPT-TF 11IR19BSPT R 1/2,Rc 1/2 (PT 1/2) 14 KTNROOOO -16 KTNSROOOO -16 (16ERAG55-TF) (16ERG55-TF) (16ERAG55) (16ERG55) 16ER14BSPT-TF 16ER14BSPT SINR1516S-11 (11IR55005) 11IR14BSPT-TF 11IR14BSPT 0.25 SINR1616S-16 (16IRAG55) (16IRG55) (16IR5501) (16IR5502) 16IR14BSPT-TF 16IR14BSPT R 3/4,Rc 3/4 (PT 3/4) SINR2016S-16 R 1,Rc 1 (PT 1) 11 KTNROOOO -16 KTNSROOOO -16 (16ERAG55-TF) (16ERG55-TF) (16ERAG55) (16ERG55) 16ER11BSPT-TF 16ER11BSPT SINR2420S-16 16IR11BSPT-TF 16IR11BSPT 0.32 R 11/4,Rc 11/4 (PT 11/4) CINR3025S-16 R 11/2,Rc 11/2 (PT 11/2) CINR3732S-16 Hereafter, all the threads are 11 TPI and the root’s radius 0.32. The same tool for R11/2 is recommended. Hereafter, all the threads are 11 TPI and the root’s radius 0.32. The same tool for Rc11/2 is recommended. 1) The largest size of minimum diameter toolholder is recommended for internal threading toolholders. Therefore it is available if minimum diameter is smaller than recommended toolholders. (e.g.) SINR2420S-16 (Min. Bore Dia.: 24mm) is recommended for the Tool of G7/8 Internal Threading from the above Table, but SINR2016S-16 can also be used. 2) When using "Partial Profile" for Tapered Pipe threading, thread's corners become sharp edged, and the shape will not be the same as the standard shape for Tapered Pipe. J42