470 Каталог KYOCERA 2016 Инструмент режущий станочный Пластины Резцы Фрезы Сверла Стр.H6

Каталог KYOCERA 2016 Режущий инструмент для станков Стр. H6 0470 Lab2u

Cut-off H H6 Cut-Off Inserts (for small diameter) TKF Applicable Inserts (TKF12) Insert Handed Insert shows Right-hand Classification of usage :Continuous-Light Interruption / 1st Choice Continuous-Light Interruption / 2nd Choice Continuous / 1st Choice Continuous / 2nd Choice Description Stainless Steel Cast Iron Non-ferrous Metals Dimension (mm) Размеры инструмента указаны в мм W D max Angle W 0 0 W MEGACOAT NANO PR1425 R L PR1535 R L 0 PR1225 R L 0 0 Carbide PR1025 R L W DLC Coated Carbide PDL025 R L W 0 Carbide KW10 R L Right lead angle Right lead angle / Tough Edge Tough Edge Right lead angle Without Chipbreaker S' Without Chipbreaker TKF12& 050-S-16DR 0.5 070-S-16DR 0.7 100-S-16DR 1.0 125-S-16DR 1.25 0.03 8.7 16° 150-S-16DR 1.5 12 200-S-16DR 2.0 TKF12& 050-S 0.5 070-S 0.7 100-S 1.0 125-S 1.25 0.03 8.7 150-S 1.5 12 200-S 2.0 TKF12& 100-T-16DR 1.0 150-T-16DR 1.5 12 0.08 8.7 16° 200-T-16DR 2.0 lii. TKF12& 100-T 1.0 150-T 1.5 12 0.08 8.7 200-T 2.0 TKF12& 050-NB-20DR 0.5 070-NB-20DR 0.7 100-NB-20DR 1.0 8.7 20° 150-NB-20DR 1.5 12 200-NB-20DR 2.0 TKF12& 050-NB 0.5 070-NB 0.7 100-NB 1.0 8.7 150-NB 1.5 12 200-NB 2.0 H8 Lead angle shows the angle when installed in toolholder As Fig.1 of H8 shows, the cut-off diameter of the insert is indicated when the top of the cut-off edge progresses 1mm from the c Inserts Identification System (Ref. to Table.1) TKF 12 R 050-S-16DR Table 1 Insert Insert Edge Width Type Size Insert Hand R: Right-hand L: Left-hand Name of Chipbreaker S: S-Chipbreaker T: T-Chipbreaker (Tough Edge) NB: Without Chipbreaker Lead Angle (6) (Front cutting edge angle) Hand of Lead Angle R: Right-hand L: Left-hand Toolholde Right-hand Toolholder Left-hand Insert Right-hand Insert Left-hand Lead Angl = Right-hand Lead Angle Right-hand 1 i> 4 0 < i 1 Inserts are sold in 10 piece boxes. Std. Item Deleted from the next catalogue P M 0 T H 3 5 3 5 3 5 3 5 0 3 5 3 5 0