165 Каталог KYOCERA 2016 Металлорежущий инструмент для токарной обработки на станках Стр.D3

Каталог KYOCERA 2016 Токарные резцы с пластинами Стр. D3 0165 ENG Lab2u

EXTERNAL TOOLHOLDER IDENTIFICATION SYSTEM A Anchor Pin Style C: Clamp Only D Double Clamp M Clamp and Lock Pin P Lock Pin Only (or Lever Lock) S Screw Only Only Clamping System S Square T: Triangle C 80° Diamond D 55° Diamond V: 35° Diamond W 80°Trigon Insert Shape This position shall be a significant number which indicates the holder cross section. For square shanks this number will represent the number of sixteenths of width and height. For rectangular holders the first digit represents the number of eighths of width and the second digit the number of quarters of height, except the following toolholder: 1-1/4 x 1-1/2 which is given the number 91. Toolholder Shank Size LENGTH AND WIDTH LENGTH AND SIDE A - 4.000 Back and End M - 4.000 Front and End B - 4.500 Back and End N - 4.500 Front and End C - 5.000 Back and End P - 5.000 Front and End D - 6.000 Back and End R - 6.000 Front and End E - 7.000 Back and End S - 7.000 Front and End F - 8.000 Back and End T - 8.000 Front and End G - 5.500 Back and End U - 5.500 Front and End NOTE: All qualified dimensions are given to a tolerance of 0.003" over a master gauge insert radius based on the standard shown. Insert I.C. Radius 1/4" - 5/16" 0.015" 3/8" -1/2" 0.031" 5/8" - 3/4" 0.047" 1" 0.062" Qualified Control Number of 1/8ths on 1/4" I.C. and over. Insert Size I.C. ANSI (inch) D C L N R 16 4 D B 1 H N KMnrFRrl D l\JULtl\U