228 Каталог KYOCERA 2016 Фрезы со сменными режущими пластинами для металлообработки Стр.J6

Каталог KYOCERA 2016 Инструмент фрезерный с СРП по металлу Стр. J6 0228 ENG Lab2u

RADIUS/BALL-NOSE RAD-8 (MRW) MRW Face Mill (Inch Size) Toolholder Dimensions (Inch Size) w- Dimensions (in) Rake Angle 0 0 o X CD c CD Max. RPM Part Number o d 8 Z c r 0D 0D1 0d 0d1 0d2 H E a b S A.R. R.R. £Z cO O 1 Q _C CD '0 MRW 2000R-12-5T 5 2.00 1.75 0.75 0.748 0.433 1.575 0.750 0.187 0.312 +12° -15.5° Yes Fig.1 0.3 16,000 2000R-12-6T 6 0.3 2500R-12-6T 6 2.50 1.75 0.75 0.748 0.433 1.575 0.750 0.187 0.312 +12° -15.5° Yes Fig.1 0.6 14,000 2500R-12-7T o 7 0.236 0.236 0.6 3000R-12-6T 6 (6mm) 3.00 2.25 1.00 0.866 0.551 1.969 1.063 0.236 0.381 (6mm) +12° -15.5° Yes Fig.1 1.1 12,000 3000R-12-8T O 8 1.1 4000R-12-7T 7 4.00 3.54 1.50 2.047 1.969 1.142 0.393 0.625 +12° -15.5° Yes Fig.2 1.5 10,600 4000R-12-9T o 9 1.4 MRW 2500R-16-5T 5 2.50 1.75 0.75 0.748 0.433 1.575 0.750 0.187 0.312 +11° -16.5° Yes Fig.1 0.5 12,800 2500R-16-6T o 6 0.5 3000R-16-6T 6 3.00 2.25 1.00 0.866 0.551 1.969 1.063 0.236 0.381 +11° -16.5° Yes Fig.1 1.1 11,000 3000R-16-7T 7 0.315 0.315 1.0 4000R-16-6T 6 (8mm) 4.00 3.54 1.50 2.047 1.969 1.142 0.393 0.625 (8mm) +11° -16.5° Yes Fig.2 1.4 9,600 4000R-16-8T o 8 1.3 5000R-16-8T 8 5.00 3.54 1.50 2.047 2.480 1.496 0.393 0.625 +11° -16.5° Yes Fig.2 2.6 8,560 5000R-16-10T o 10 2.5 Spare Parts and Applicable Inserts (Inch Size) Spare Parts Applicable Inserts B16 Clamp Screw Wrench Pre-Set Torque Wrench Anti-seize Compound Arbor Bolt Part Number u DTP M-15 TTP-20 % General Purpose Low Cutting Force Tough Edge For Heavy Milling) MRW 2000R-12... HH3/8-1.25 2500R-12... (HH3/8-1.25H) 3000R-12... SB-4085TRP DTPM-15 - PST-IP15 MP-1 HH1/2-1.25 R0MU1204M0ER-GM ROMU1204M0ER-SM ROMU1204M0ER-GH Recommended Torque for (HH1/2-1.25H) 4000R-12... Insert Clamp 3.5 N-m MRW 2500R-16... HH3/8-1.25 (HH3/8-1.25H) 3000R-16... SB-50140TRP - TTP-20 PST-IP20 MP-1 HH1/2-1.25 R0MU1605 M0ER-GM RQMU1605M0ER-SM ROMU1605M0ER-GH Recommended Torque for (HH1/2-1.25H) 4000R-16... Insert Clamp 4.5 N-m 5000R-16... Caution with Max. Revolution Recommended Cutting Conditions J10 When running an end mill or a cutter at the maximum revolution, the insert or cutter may be damaged by centrifugal force. Coat Anti-Seize Compound MP-1) thinly on portion of taper and thread prior to installation. For prolonged insert and cutter life, it is recommended to use the pre-set torque wrench to ensure proper insert screw force. Pre-Set Torque Wrench sold separately. S is Maximum D.O.C. For more details, see Page J10 J6 Kyocera (Customer Service) - Option 1 (Technical Support) - Option 2 Visit us online at KyoceraPrecisionToois.com U.S. Stock Standard World Express (Shipping: 7-10 Business Days) O