227 Каталог KYOCERA 2016 Фрезы со сменными режущими пластинами для металлообработки Стр.J5

Каталог KYOCERA 2016 Инструмент фрезерный с СРП по металлу Стр. J5 0227 ENG Lab2u

RAD-8 (MRW) Longer tool life with a wide insert lineup including 4 grades and 3 chipbreakers Available for Steel, Stainless Steels, Cast Iron, and Heat-Resistant Alloys Workpiece Material Applicable Insert Grade Applicable Chipbreaker Carbon Steel / Alloy Steel / Die Steel PR1525 GM/SM/GH Chipbreaker 3 Gray Cast Iron / Nodular Cast Iron PR1510 GH/GM Chipbreaker Ni-base Heat Resistant Alloy M Martensitic Stainless Steel CA6535 SM/GM Chipbreaker Titanium Alloy M Austenitic Stainless Steel M Precipitation Hardened Stainless Steel PR1535 SM/GM Chipbreaker For Chipbreaker Selection and Recommended Cutting Conditions J10 New Grades for Difficult-to-cut Materials Stable cutting prevents insert fracturing Good for high efficiency machining CA6535 1 For Ni-base heat resistant alloys and martensitic stainless steels 1 High heat resistance and wear resistance with CVD coating 1 Improved stability due to thin film coating technology 1 For titanium alloys and precipitation hardened stainless steel 1 Stable milling operation and long tool life with Kyocera's MEGACOAT NANO coating technology 1 Improved stability due to thin film coating technology ‘ w -V -C \\A 49 Jl>‘ '. 4 Smooth & less adhesion with improved stability 17 Newly Developed Tougher Substrate High aspect ratio and micro columnar TiCN coating layer improves abrasive wear resistance Tool Life Comparison Ni-base Heat Resistant Alloy Cutting Time min Vc = 160 sfm, D.O.C. = 0.039”, fz = 0.006 ipt, WET 1st recommendation GM Chipbreaker Martensitic Stainless Steel Cutting Time min Vc = 980 sfm, D.O.C. = 0.079”, fz = 0.008 ipt, WET 1st recommendation SM Chipbreaker KMnrFRrl IxjULlIXQ J5 PR1535