KM Micro / KM Mini Assembly / Disassembly Instructions 1 Apply GLEITMO 805 grease generously to threads, cones on torque screw and nut, and bump-

KM Micro / KM Mini Assembly / Disassembly Instructions 1. Apply GLEITMO 805 grease generously to threads, cones on torque screw and nut, and bump-off area (behind threads) of the torque screw. Also, apply grease generously to the female taper on the shank. 2. Screw the torque screw and the nut together. 3. Insert the torque screw and nut into the shank (as one unit) as shown in (Frame 1). 4. Install the containment screw as shown (Frame 2). 5. When initially clamping the KM Micro shank in a machine tool slot, it is recommended that a cutting unit be in the shank. 6. Disassembly is the reverse of assembly procedure. Tools Required Hex wrenches. Pliers. Kennametal recommends and uses GLEITMO 805. Clean towels or shop rags. Solvent or degreaser that does not leave residue (used to clean inside the taper and canister). Should the unit become contaminated, you can use a degreasing agent or something similar to clean the surfaces. CAUTION DO NOT USE silicone cleaner or WD-40 -type lubricants. KMl Micro iKMl Mn QUCK-CHAHGE TOOLHE LB lubricant order number size GLEITMO 805 grease 1567575 500g cartridge GLEITMO 805 grease 1567577 1000g tin (continued) M68 Kennametal Technical Information Technical Information KM Micro /KM Mini Manual Clamping System Kennametal