1085 Каталог KENNAMETAL 2013 Инструментальная оснастка для металлорежущих станков Стр.F59

Каталог KENNAMETAL 2013 Инструментальная оснастка Стр. F59 1085 Lab2u

Kennametal CAT50 Shank Tools TG Single-Angle Collet Chucks (TG Form B/AD continued) collet series - "1 / Collet Capacity mm inch TG collet series min max min max TG75 2,6 20,0 3/64 3/4 TG100 2,6 25,5 5/64 1 TG Round-CV Form B/AD order number catalog number collet series D11 L1 L9 V locknut wrench ft. lbs. stop screw wrench size stop screw lbs 1261786 CV50BTG075300G TG75 1.97 3.00 1.93 1.46 LNA075M HSW45M 100 SS081041G 4mm & 5/32 7.34 1261787 CV50BTG075600G TG75 1.97 6.00 1.93 4.45 LNA075M HSW45M 100 SS081041G 4mm & 5/32 9.56 1261788 CV50BTG100300G TG100 2.36 3.00 2.56 .98 LNA100M HSW58M 150 SS112041G 4mm & 5/32 7.32 1261789 CV50BTG100750G TG100 2.36 7.50 2.56 5.12 LNA100M HSW58M 150 SS112041G 4mm & 5/32 11.80 NOTE: Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque. Collet chuck technical section, see page M98. Supplied with locknut and stop screw. Locknut wrench must be ordered separately. Interchangeable locknuts, coolant-style locknuts, and coolant disks are available and must be ordered separately; see pages L16-L17. Stop screw coolant caps are available and must be ordered separately; see pages L34-L35. Balanceable/interchangeable locknuts are available and must be ordered separately; see page L16. TG standard straight-bore collets, see page J10. TG tap collets, see page J10. For retention knobs, see page L45. Kennametal F59 CAT50 Shank Tools