920 Каталог KENNAMETAL 2013 Инструментальная оснастка для металлорежущих станков Стр.D58

Каталог KENNAMETAL 2013 Инструментальная оснастка Стр. D58 0920 Lab2u

CVKV50 Shank Tools CVKV50 Shank Tools TG Single-Angle Collet Chucks Kennametal L1 = from taper gage diameter Collet Capacity mm inch TG collet series min max min max TG75 2,6 20,0 3/64 3/4 TG100 2,6 25,5 5/64 1 ERICKSON TG Round-CVKV Form B/AD order number catalog number collet series D11 L1 L1FC L9 V locknut wrench stop screw wrench size stop screw Nm kg 3860140 CVKV50BTG075275G TG75 50 69,85 68,35 50 24 LNA075M HSW45M SS081041G 4mm & 5/32 136 3,26 3860141 CVKV50BTG075400G TG75 50 101,60 100,10 50 59 LNA075M HSW45M SS081041G 4mm & 5/32 136 3,70 3860142 CVKV50BTG075600G TG75 50 152,40 150,90 50 104 LNA075M HSW45M SS081041G 4mm & 5/32 136 4,46 3860143 CVKV50BTG100275G TG100 60 69,85 68,35 64 12 LNA100M HSW58M SS112041G 4mm & 5/32 203 3,26 3860144 CVKV50BTG100400G TG100 60 101,60 100,10 64 38 LNA100M HSW58M SS112041G 4mm & 5/32 203 3,81 3860145 CVKV50BTG100600G TG100 60 152,40 150,90 64 90 LNA100M HSW58M SS112041G 4mm & 5/32 203 4,71 NOTE: Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque. Collet chuck technical section, see page M98. Supplied with locknut and stop screw. Locknut wrench must be ordered separately. Interchangeable locknuts, coolant-style locknuts, and coolant disks are available and must be ordered separately; see pages L16-L17. Stop screw coolant caps are available and must be ordered separately; see pages L34-L35. Balanceable/interchangeable locknuts are available and must be ordered separately; see page L16. TG standard straight-bore collets, see page J10. TG tap collets, see page J10. For retention knobs, see page L45. D58 Kennametal