651 Каталог KENNAMETAL 2013 Инструментальная оснастка для металлорежущих станков Стр.A611

Каталог KENNAMETAL 2013 Инструментальная оснастка Стр. A611 0651 Lab2u

Kennametal KM80ATC Shank Tools ER Single-Angle Collet Chucks Grip (2:1 advantage). Collet Capacity ER collet series min mm max min inch max ER32 2,0 20,0 .08 .81 ER40 3,0 26,0 .12 1.00 ER Single-Angle Collet Chucks order number catalog number collet series D11 mm in mm L1 in L9 mm in locknut wrench Nm ft. lbs. kg lbs 1953471 KM80ATCER3265 ER32 50 1.97 65 2.559 46,0 1.81 LNSER32M ER32WM 136 100 1,45 3.20 2022196 KM80ATCER4090 ER40 50 1.97 90 3.543 70,3 2.77 LNSER40M ER40WM 176 130 2,09 4.61 NOTE: Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque. Collet chuck technical section, see page M98. Supplied with locknut. Locknut wrench must be ordered separately. Interchangeable coolant-style locknuts and coolant disks are available and must be ordered separately; see page L19. ER standard straight-bore collets, see page J50. ER tap collets, see pages J58-J59. ER TCT tension-only tap collets, see page J60. Kennametal A611 KM80ATC Shank Tools