650 Каталог KENNAMETAL 2013 Инструментальная оснастка для металлорежущих станков Стр.A610

Каталог KENNAMETAL 2013 Инструментальная оснастка Стр. A610 0650 Lab2u

a KM80ATC Shank Tools KM80ATC Shank Tools TG Single-Angle Collet Chucks Kennametal Tremendous Grip (3:1 advantage). Collet Capacity TG collet series min mm max min inch max TG75 2,6 20,0 3/64 3/4 TG100 2,6 25,5 5/64 1 TG150 11,6 40,0 23/64 1-1/2 TG Single-Angle Collet Chucks order number catalog number collet series mm D11 in mm L1 in mm L9 in mm V in kg lbs 3138953 KM80ATCTG075160 TG75 50 1.97 160 6.299 53 2.09 47 1.85 2,96 6.52 2022194 KM80ATCTG100394 TG100 60 2.36 100 3.937 70 2.75 2,32 5.11 2022195 KM80ATCTG150492 TG150 85 3.35 125 4.921 83 3.27 4,31 9.50 Spare Parts catalog number locknut wrench stop screw wrench size stop screw coolant cap Nm ft. lbs. KM80ATCTG075160 LNA075M HSW45M SS081041G 4mm & 5/32 SSCC081 108-136 80-100 KM80ATCTG100394 LNA100M HSW58M - - 163-203 120-150 KM80ATCTG150492 LNA150M HSW80M - - 217-271 160-200 NOTE: Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque. Collet chuck technical section, see page M98. Supplied with locknut and stop screw. Locknut wrench must be ordered separately. Interchangeable locknuts, coolant-style locknuts, and coolant disks are available and must be ordered separately; see pages L16-L17. Stop screw coolant caps are available and must be ordered separately; see pages L34-L35. Balanceable/interchangeable locknuts are available and must be ordered separately; see page L16. TG standard straight-bore collets, see page J10. TG tap collets, see page J10. A610 Kennametal