454 Каталог KENNAMETAL 2013 Инструментальная оснастка для металлорежущих станков Стр.A414

Каталог KENNAMETAL 2013 Инструментальная оснастка Стр. A414 0454 Lab2u

a KM50TS Shank Tools KM50TS Shank Tools ER Single-Angle Collet Chucks Kennametal Grip (2:1 advantage). ISO 26622 Collet Capacity KM QUICK CHANGE Collet Chuck Round Nut ER collet series min mm max min inch max ER25 1,0 16,0 .04 .63 ER32 1,0 20,0 .08 .81 ER40 3,0 26,0 .08 1.00 order number catalog number collet series D11 mm in mm L1 in L9 V mm in locknut wrench Nm ft. lbs. kg lbs 3795029 KM50TSER25050M ER25 42 1.65 50 1.969 41,2 1.62 - - LNSER25M ER25WM 104 77 0,47 1.03 3795030 KM50TSER32060M ER32 50 1.97 60 2.362 47,3 1.86 - - LNSER32M ER32WM 136 100 0,62 1.36 3795031 KM50TSER40070M ER40 63 2.48 70 2.756 53,3 2.10 - - LNSER40M ER40WM 176 130 0,88 1.94 NOTE: Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque. Collet chuck technical section, see page M98. Supplied with locknut and stop screw. Locknut wrench must be ordered separately. Interchangeable coolant-style locknuts and coolant disks are available and must be ordered separately; see page L19. Stop screw coolant caps are available and must be ordered separately; see pages L34-L35. ER standard straight-bore collets, see page J50. ER tap collets, see pages J58-J59. ER TCT tension-only tap collets, see page J60. A414 Kennametal