370 Каталог KENNAMETAL 2013 Инструментальная оснастка для металлорежущих станков Стр.A330

Каталог KENNAMETAL 2013 Инструментальная оснастка Стр. A330 0370 Lab2u

a KM40TS Shank Tools KM40TS Shank Tools ER Single-Angle Collet Chucks Kennametal Grip (2:1 advantage). Collet Capacity mm inch ER collet series min max min max ER16 0,5 10,0 .02 .41 Collet Chuck Hex Nut straight counterbore order number catalog number collet series D11 L1 L9 V mm in locknut wrench collet torque Nm ft. lbs. collet torque Nm ft. lbs. kg lbs 3950246 KM40TSER16038M ER16 28 1.10 38 1.496 32,8 1.29 - - LNHSER16M OEW25M 56 42 40 30 0,20 .44 NOTE: Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque. Collet chuck technical section, see page M98. Supplied with locknut and stop screw. Locknut wrench must be ordered separately. Interchangeable coolant-style locknuts and coolant disks are available and must be ordered separately; see pages L16-L17. Stop screw coolant caps are available and must be ordered separately; see pages L34-L35. ER standard straight-bore collets, see page J50. ER tap collets, see pages J58-J59. ER TCT tension-only tap collets, see page J60. (continued) A330 Kennametal