458 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.454

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 454 0458 ENG Lab2u

FACE GROOVING CUTGniP GIMM 8CC Single-Ended Utility Insert with a Frontal Chip Splitter for External Rough Grooving and Side Turning i W j) li_ Dimensions Tough Hard Recommended Machining Data Designation W±0.05 R±°.°5 M IC808 IC908 f face-groove (mm/rev) GIMM 8CC 8.00 0.80 5.80 I 0.30-0.45 For cutting speed recommendations, see pages 464-465 For tools, see pages: CGFG 51-P8 (452) CGHN-P8 (240) CGHR/L-P8DG (240) CGPAD (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) CUTGniP GDMM-CC Single-Ended Utility Insert for External Rough Grooving and Side Turning with a Frontal Chip Splitter Dimensions Tough Hard Recommended Machining Data Designation W °.°5 R±°.°5 M IC830 IC354 IC808 IC907 f face-groove (mm/rev) GDMM 7CC 7.00 0.80 6.00 0.30-0.45 GDMM 8CC 8.00 0.80 5.60 0.30-0.45 For cutting speed recommendations, see pages 464-465 For tools, see pages: C -GHDR/L (233) GADR/L-8 (243) GADR/L-JHP (243) GAFG-R/L-8 (451) GHDR/L (long pocket) (240) GHDR/L-JHP (long pocket) (241) GHFG-R/L-8 (450) GHFGR/L-8 (450) GHIR/L (W=7.0-8.3) (301) FACE MACHINING LINE TNFFH-IQ Face Grooving Blades Designation W D1 min(1) D1 max(2) T max-a h1 B1 f A2 l1 Insert 4 TNFFH 65R/L-3IQ 3.00 65.0 90.0 18.00 24.8 32.0 4.1 5.2 150.00 TNF 3... ETF 3-6 TNFFH 90R/L-3IQ 3.00 90.0 120.0 18.00 24.8 32.0 4.1 5.2 150.00 TNF 3... ETF 3-6 TNFFH 120R/L-3IQ 3.00 120.0 160.0 24.00 24.8 32.0 4.1 5.2 150.00 TNF 3... ETF 3-6 TNFFH 80R/L-4IQ 4.00 80.0 150.0 32.00 24.8 32.0 3.8 5.2 150.00 TNF 4... ETF 3-6 TNFFH 150R/L-4IQ 4.00 150.0 500.0 32.00 24.8 32.0 3.8 5.2 150.00 TNF 4... ETF 3-6 TNFFH 80R/L-5IQ 5.00 80.0 150.0 30.00 24.8 32.0 3.5 5.2 150.00 TNF 5... ETF 3-6 TNFFH 150R/L-5IQ 5.00 150.0 500.0 35.00 24.8 32.0 3.5 5.2 150.00 TNF 5... ETF 3-6 TNFFH 80R/L-6IQ 6.00 80.0 150.0 30.00 24.8 32.0 3.3 5.2 150.00 TNF 6... ETF 3-6 TNFFH 150R/L-6IQ 6.00 150.0 700.0 35.00 24.8 32.0 3.3 5.2 150.00 TNF 6... ETF 3-6 B1 dimension links blades and blocks Minimum penetration diameter Maximum penetration diameter Optional, should be ordered separately For inserts, see pages: TNF-M-IQ (455) TNF-P-IQ (455) 454 ISCAR