372 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.368

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 368 0372 ENG Lab2u

PARTING SELECTION GUIDE PARTING UA/UT-Type A chipformer for use at low feeds 1 Recommended for CrNi alloys and low carbon steel, especially in the bearing industry and on similar, problematic materials The narrow chipformer design ensures short deformed chips and provides improved performance UA and UT are similar chipformers. UT is slightly tighter than the UA chipformer f W i nsert mm/rev Recommended feed range as a function of insert width P-Type Very positive rake inclination and sharp cutting edge For soft materials, slim parts and general parting f W insert mm/rev 55 Alloy Steel Austenitic Stainless High Temp. Alloys Nonferrous Materials Cast Iron X 1 X M-Type Similar to C-type, but with modified edge Improved chip control at medium feed f V i nsert mm/rev Alloy Steel Austenitic Stainless High Temp. Alloys Nonferrous Materials Cast Iron X 1 X 1 X A-Type Positive rake, sharp edge For parting aluminum In grade IC20 f W insert 43 mm/rev Alloy Steel Austenitic Stainless High Temp. Alloys Nonferrous Materials Cast Iron X X X 1 X 368 ISCAR