370 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.366

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 366 0370 ENG Lab2u

PARTING SELECTION GUIDE PARTING Main Chipformers C-Type First choice for parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders provides extra cutting-edge strength. Medium-to-high feed f W;8nsert mm/rev Alloy Steel Austenitic Stainless High Temp. Alloys Nonferrous Materials Cast Iron X (IC20 only) (IC20 only) Recommendations are for neutral inserts. For R/L inserts, reduce feed by 20-40%. Recommended feed range as a function of insert width MF Type Parting and Grooving Double-Sided Insert for Soft and Hard Materials, Medium Feed f Wmsert mm/rev Alloy Steel Austenitic Stainless High Temp. Alloys Nonferrous Materials Cast Iron X JT-Type The JT chipformer design is based on the J-type chipformer with a T-land reinforced frontal cutting edge. 1 Provides a solution for the intermediate range between the strong and negative C-type configuration and the positive edged J-type chipformer. Can be used on a wide range of materials, including soft or hard alloy and stainless steel, high temperature alloys and also cast iron. 1 The JT chipformer deforms the chips into compact shapes, in the same manner as the J-type, but it can be used at higher feeds due to its reinforced edge. f W insert mm/rev Recommended feed range as a function of insert width Alloy Steel Austenitic Stainless High Temp. Alloys Nonferrous Materials Cast Iron X 366 ISCAR