364 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.360

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 360 0364 ENG Lab2u

GROOVE-TURN CUTGniP GIPA 8-35V (V-shape) V-Shaped Inserts for Machining Aluminum Wheels Dimensions Tough Hard Recommended Machining Data Designation R R±toler M IC20 IC4 ID5 ap (mm) f turn (mm/rev) GIPA 6.0-35V-0.8 0.80 0.050 4.80 1.00-3.60 0.21-0.48 GIPA 8YZ-35V-0.80 0.80 0.050 6.00 1.00-4.80 0.24-0.56 GIPA 8YZ-35V-1.20 1.20 0.050 6.00 1.45-4.80 0.24-0.62 GIPA 8YZ-35V-1.20-D (1) 1.20 0.050 6.00 1.45-4.80 0.35-0.88 GIPA 8-35V-1.20 1.20 0.050 6.00 1.45-4.80 0.24-0.62 GIPA 8-35V-1.20-D (1) 1.20 0.050 6.00 1.45-4.80 0.35-0.88 GIPA 8-35V-3.0 3.00 0.050 6.00 3.60-4.80 0.24-0.67 Precision ground and polished rake to avoid built-up edge Toolholder seat needs to be modified according to insert profile to ensure clearance (1) Single-ended PCD tipped insert For tools, see pages: GHIUR/L-C-22.5A-8V (357) GHIUR/L-C-A (15° 27.5°) Bars (357) GHIUR/L-UC (357) GHVR/L (358) CUTGniP GDMA Utility Double-Ended Insert with a Polished Top Rake for Machining Aluminum T -r )k= j Can cut arcs to 250° Dimensions Tough Hard Recommended Machining Data Designation W±0.05 R±005 M 7 0 IC IC507 ap (mm) f turn (mm/rev) f groove (mm/rev) GDMA 840 8.00 4.00 5.60 1 0.00-4.00 0.24-0.67 0.14-0.38 For heavy-duty machining Dmin for internal machining = 65 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: GADR/L-8 (243) GADR/L-JHP (243) GAFG-R/L-8 (451) GHDKR/L (358) GHIFR/L-A (357) GHIR/L (W=7.0-8.3) (301) GHIUR/L-C-A (15° 27.5°) Bars (357) GHIUR/L-UC (357) FUCGniP FSHIUR 10° / 15° Approach Angle Bars for Facing and Internal Profiling of Aluminum Designation W d D min l1 l2 T max-i FSHIUR 40C-15A-6 6.00 40.00 160.00 320.00 68.0 2.20 FSHIUR 40C-10A-8 8.00 40.00 160.00 320.00 68.0 2.40 FSHIUR 40C-15A-8 8.00 40.00 160.00 320.00 68.0 3.00 Clamping torque for FSHIUR..-6: 9 Nxm, for FSHDR..-8: 10.5 Nxm f 21.0 15 SR M6X1-28509 HW 5.0 OR 5X1N PU SEAL-28510 PL 40 24.3 10 SR M6X1-28509 HW 5.0 OR 5X1N PU SEAL-28510 PL 40 21.0 15 SR M6X1-28509 HW 5.0 OR 5X1N PU SEAL-28510 PL 40 For inserts, see pages: FSP/MA (362) Insert Clamping Instructions 1. Position the insert in the pocket so the notch (1) on the insert sits on top of the frontal bulge (2) of the pocket 2. 2. Close the clamping screw (3) Warning Do not apply any force and do not hold the insert in place while closing the screw There is no contact between the insert and pocket rear wall (4) o a 360 ISCAR