363 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.359

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 359 0363 ENG Lab2u

CUTGRiF GIPA (full radius W=3-6) Precision Double-Ended Inserts with Polished Top Rake for Machining Aluminum 5o 3 t- jg £ Dimensions Tough Hard Recommended Machining Data Designation W±0°2 R±005 M IC20 IC806 IC4 ID5 ap (mm) f turn (mm/rev) f groove (mm/rev) GIPA 3.00-1.50 3.00 1.50 2.40 0.00-1.50 0.15-0.30 0.08-0.16 GIPA 3.00-1.50-D I1 3.00 1.50 2.40 0.00-1.50 0.19-0.36 0.09-0.19 GIPA 3.00-1.50YZ-D (2> 3.00 1.50 2.40 0.00-1.50 0.19-0.36 0.09-0.19 GIPA 4.00-2.00 4.00 2.00 3.20 0.00-2.00 0.20-0.43 0.10-0.22 GIPA 4.00-2.00-D (1> 4.00 2.00 3.20 0.00-2.00 0.25-0.53 0.12-0.26 GIPA 4.00-2.00YZ-D (2> 4.00 2.00 3.20 0.00-2.00 0.25-0.53 0.12-0.26 GIPA 5.00-2.50 5.00 2.50 3.90 0.00-2.50 0.21-0.48 0.09-0.24 GIPA 5.00-2.50-D (1> 5.00 2.50 3.90 0.00-2.50 0.22-0.60 0.11-0.30 GIPA 5.00-2.50YZ-D (2> 5.00 2.50 3.90 0.00-2.50 0.22-0.60 0.11-0.30 GIPA 6.00-3.00 6.00 3.00 4.80 0.00-3.00 0.21-0.58 0.11-0.29 GIPA 6.00-3.00-D (1> 6.00 3.00 4.80 0.00-3.00 0.26-0.72 0.13-0.36 GIPA 6.00-3.00YZ 6.00 3.00 4.80 0.00-3.00 0.21-0.58 0.11-0.29 GIPA 6.00-3.00YZ-D (2> 6.00 3.00 4.80 0.00-3.00 0.26-0.72 0.13-0.36 GIPA 6.00-3.00CB (3> 6.00 3.00 4.80 0.00-3.00 0.21-0.58 0.11-0.29 For cutting speed recommendations and user guide, see pages 340-351 (1) Single-ended PCD tipped insert (2) Single-ended molded PCD chipformer tipped insert (3) Single-ended flat PCD tipped insert with chip deflector For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN- CGPAD (238) CGPAD-JHP (238) GHDKR/L (358) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) GHIUR/L-C-A (15° 27.5°) Bars (357) GHMPR/L (232) GHMR/L (232) GHSR/L (312) GHSR/L-JHP-SL (313) D (239) CGHN-DG (239) CGHN-S (239) (234) GHGR/L (235) GHIFR/L-A (357) CUTGRiF GIPA/GIDA 8 (full radius) Precision Double-Ended Inserts with Polished Top Rake for Machining Aluminum GIDA 80-40CB -ix W T IS £1 jk= J, GIPA 8.00-4.00 Dimensions Tough Hard Recommended Machining Data Designation W±0.02 R±005 M IC20 IC4 ID5 ap (mm) f turn (mm/rev) f groove (mm/rev) GIDA 80-40 8.00 4.00 5.60 0.00-4.00 0.24-0.67 0.14-0.38 GIDA 80-40-D 8.00 4.00 5.60 0.00-4.00 0.24-0.67 0.14-0.38 GIDA 80-40CB-D (1> 8.00 4.00 5.60 0.00-4.00 0.24-0.67 0.14-0.38 GIDA 80-40YZ 8.00 4.00 5.60 0.00-4.00 0.24-0.67 0.14-0.38 GIDA 80-40YZ-D 8.00 4.00 5.60 0.00-4.00 0.35-0.96 0.18-0.48 GIPA 8.00-4.00 8.00 4.00 6.00 0.00-4.00 0.24-0.67 0.14-0.38 ID5 is a single-ended PCD tipped insert For cutting speed recommendations and user guide, see pages 340-351 (1) Should not be clamped on tools with "A" suffix For tools, see pages: C -GHDR/L (233) CGHN-8-10D (244) GADR/L-8 (243) GADR/L-JHP (243) GAFG-R/L-8 (451) GHDKR/L (358) GHDR/L (long pocket) (240) GHDR/L-8A (358) GHDR/L-JHP (long pocket) (241) GHFGR/L-8 (450) GHIFR/L-A (357) GHIR/L (W=7.0-8.3) (301) GHIUR/L-C-A (15° 27.5°) Bars (357) GHIUR/L-UC (357) Member IMC Group kSSII t 5 W R LM W GIDA 80-40 R 359 GROOVE-TURN