272 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.268

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 268 0272 ENG Lab2u

GROOVE-TURN PENTACUT PCHPR/L Perpendicular Holders Carrying Inserts with 5 Cutting Edges for Facing, Grooving, Parting and Recessing Designation h b W min W max f F1 l1 l2 h4 Tmax-a(1) PCHPR/L 16-24 16.0 16.0 0.50 3.20 (2) 1.5 (3) 23.5 120.00 11.5 - 6.50 SR 16-212-01397 T-20/5 PCHPR/L 20-24 20.0 20.0 0.50 3.20 (2) 1.5 (3) 28.0 120.00 11.5 - 6.50 SR 16-212-01397 T-20/5 PCHPR/L 25-24 25.0 25.0 0.50 3.20 (2) 1.5 (3) 33.0 135.00 11.5 - 6.50 SR 16-212-01397 T-20/5 PCHPR/L 20-34 20.0 20.0 1.40 4.00 1.9 34.0 120.00 15.0 6.0 10.00 SR 16-212-01397 T-20/5 PCHPR/L 25-34 25.0 25.0 1.40 4.00 1.9 34.0 135.00 15.0 - 10.00 SR 16-212-01397 T-20/5 (1) For specific information, refer to insert data. (2) Up to 6.2 mm width may be ordered on request. (3) Valid for inserts with W<3.2 mm For inserts, see pages: PENTA 24-BSPT (275) PENTA 24-ISO (274) PENTA 24-MT (276) PENTA 24-NPT (511) PENTA 24-UN (275) PENTA 24-W (275) PENTA 24-WT (276) PENTA 24N-C (271) PENTA 24N-C (full radius) (272) PENTA 24N-J (270) PENTA 24N-J (full radius) (271) PENTA 24N-PF/P (272) PENTA 24N-Z (273) PENTA 24R-C (410) PENTA 24R-P (412) PENTA 24R/L-J (409) PENTA 24R/L-Z (411) PENTA 34F-R/L (458) PENTA 34N-C (277) PENTA 34N-J (278) PENTA 34N-PB (276) PENTA 34R/L-C (413) PENTA 34R/L-J (414) PENTA 34R/L-PB (414) PENTACUT MODULAR-GRiF PCADR/L Adapters for PENTACUT Grooving Inserts Designation W min W max L5 l1 f2 f3 A1 A2 h1 B1 PCADR/L 24N 0.50 3.18 (1) 17.00 41.50 3.20 2.00 9.00 5.2 24.0 30.3 SR 16-212-01397L(a) T-2010/5 PCADR/L 34N 1.50 4.00 29.60 54.20 3.35 1.85 11.00 5.2 24.0 31.0 SR 16-212-01397 T-2010/5 Tmax and Dmax according to insert limitation (1) Up to 6.2 mm width may be ordered on request (a) For left-hand holders For inserts, see pages: PENTA 24-BSPT (275) PENTA 24-ISO (274) PENTA 24-MT (276) PENTA 24-NPT (511) PENTA 24-UN (275) PENTA 24-W (275) PENTA 24-WT (276) PENTA 24N-C (271) PENTA 24N-C (full radius) (272) PENTA 24N-J (270) PENTA 24N-J (full radius) (271) PENTA 24N-PF/P (272) PENTA 24N-Z (273) PENTA 24R-C (410) PENTA 24R-P (412) PENTA 24R/L-J (409) PENTA 24R/L-Z (411) PENTA 34F-R/L (458) PENTA 34N-C (277) PENTA 34N-J (278) PENTA 34N-PB (276) PENTA 34R/L-C (413) PENTA 34R/L-J (414) PENTA 34R/L-PB (414) For holders, see pages: C -MAHD-JHP (479) C -MAHPD-JHP (480) MAHR/L-JHP-MC (236) MAHPR/L-JHP (237) MAHR/L-JHP (236) MAHR/L (235) MAHPR/L (237) C -MAHD (479) C -MAHPD (480) C -MAHUR/L (479) C -MAHDR-45 (478) HSK A63WH-MAHUR/L (482) HSK A63WH-MAHDR-45 (481) HSK A63WH-MAHDOR (482) IM-MAHD (483) IM-MAHPD (483) pentacut JMtcut MODULARGRiP PCADR/L-JHP Adapters with High Pressure Coolant Holes for PENTACUT Grooving Inserts MAHR -JHP a r 340 1 Bar Max Right-hand shown f=f1(R.H. holder)+f2(R.H. adapter) f=f1(L.H. holder)+f3(R.H. adapter) Designation W min W max L5 l1 f2 f3 A1 A2 h1 B1 Insert PCADR/L 24-JHP 0.50 3.18 (1) 19.30 43.80 5.20 2.00 10.00 7.2 24.0 33.0 PENTA 24 SR 16-212-01397L T-2010/5 Tmax and Dmax according to insert limitation For user guide and accessories, see pages 340-355 (1) Up to 6.2 mm width can be ordered on request For inserts, see pages: PENTA 24-BSPT (275) PENTA 24-ISO (274) PENTA 24-MT (276) PENTA 24-NPT (511) PENTA 24-UN (275) PENTA 24-W (275) PENTA 24-WT (276) PENTA 24N-C (271) PENTA 24N-C (full radius) (272) PENTA 24N-J (270) PENTA 24N-J (full radius) (271) PENTA 24N-PF/P (272) PENTA 24N-Z (273) PENTA 24R-C (410) PENTA 24R-P (412) PENTA 24R/L-J (409) PENTA 24R/L-Z (411) For holders, see pages: MAHR/L-JHP-MC (236) Flow Rate vs. Pressure 1 70 Bar 100 Bar 140 Bar Flow Rate (liters/min) Flow Rate (liters/min) Flow Rate (liters/min) 9-11 11-13 12-14 Designation PCADR/L 24-JHP 268 ISCAR