269 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.265

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 265 0269 ENG Lab2u

265 CUTGniP GDMW 2.4 Utility Double-Ended I nserts for External Turning, Grooving and Parting ±0.10= -201 -, Ins, Dimensions Tough Hard Recommended Machining Data Designation W±0.04 R±003 M T max-r IC830 0 8 IC IC20 IC20N ap (mm) f turn (mm/rev) f groove (mm/rev) GDMW 2.4 2.40 0.18 2.00 18.00 1 0.25-1.50 0.07-0.12 0.05-0.08 For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: PADR/L (264) PHGR/L (264) PHSR/L (312) PENVmST PCHR/L-24 Grooving, Parting and Recessing Holders Carrying Inserts with 5 Cutting Edges W f2 0.50-3.20 2.0 3.21-4.23 2.5 4.24-5.20 3.0 5.21-6.20 3.5 6 21-8.20 4.5 11 1 h h \ + Li Tmax-r M fi t iUL HIb Right-hand shown Designation h b W min W max f1 T max-r<2> l1 l2 h4 PCHR/L 10-24 10.0 10.0 0.50 3.20 6.5 6.50 120.00 19.5 6.0 SR 16-212-01397L T-2010/5 PCHR/L 12-24 12.0 12.0 0.50 3.20 8.5 6.50 120.00 19.5 4.0 SR 16-212-01397L T-2010/5 PCHR/L 16-24 16.0 16.0 0.50 3.20 12.5 6.50 120.00 19.5 - SR 16-212-01397L T-2010/5 PCHR/L 20-24 20.0 20.0 0.50 3.20 16.5 6.50 120.00 19.5 - SR 16-212-01397L T-2010/5 PCHR/L 25-24 25.0 25.0 0.50 3.20 21.5 6.50 135.00 19.5 - SR 16-212-01397L T-2010/5 PCHR/L 16-24-5 16.0 16.0 3.21 5.20 11.5 6.40 120.00 21.5 4.0 SR PCHL-8-06642 T-15/5 PCHR/L 20-24-5 20.0 20.0 3.21 5.20 15.5 6.40 120.00 21.5 - SR PCHL-8-06642 T-15/5 PCHR/L 25-24-5 25.0 25.0 3.21 5.20 20.5 6.40 135.00 21.5 - SR PCHL-8-06642 T-15/5 PCHR/L 25-24-8 (1) 25.0 25.0 5.21 8.20 18.5 6.50 135.00 19.5 - SR PCHL-8-06642 T-15/5 f=f1+f2 (according to insert width (W) being used) Used with special inserts only (2) For specific information, refer to insert data For inserts, see pages: PENTA 24-BSPT (275) PENTA 24-ISO (274) PENTA 24-MT (276) PENTA 24-NPT (511) PENTA 24-UN (275) PENTA 24-W (275) PENTA 24-WT (276) PENTA 24N-C (271) PENTA 24N-C (full radius) (272) PENTA 24N-J (270) PENTA 24N-J (full radius) (271) PENTA 24N-PF/P (272) PENTA 24N-Z (273) PENTA 24R-C (410) PENTA 24R-P (412) PENTA 24R/L-J (409) PENTA 24R/L-Z (411) GROOVE-TURN