202 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.198

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 198 0202 ENG Lab2u

ISOTURN INSERTS USER GUIDE Chipformers for Medium Machining Double-sided, very positive rake, sharp- and positive radial edge for heat-resistant alloys, stainless steel, aluminum alloys and soft, low carbon steel. Double-sided for general applications. Secure cutting edge for medium- and semi-roughing on steel and cast iron. Double-sided sharp cutting edge with a 16° positive rake angle for machining high temperature alloys at ap<3 mm. Single-sided for medium to rough machining on aluminum and soft materials. Chipformers for Roughing R3P Chipformer Chip-breaker for rough machining on steel with a positive rake angle and reinforced cutting edge for better performance and longer tool life. Double-sided insert for rough machining on stainless steel with a unique deflector geometry to improve chip control. Includes a wavy surface to prevent chip hammering. Double-sided 6° negative flank trigone insert for high feed turning on steel. Double-sided trigon for roughing applications. Feed ranges: from 0.25 to 0.65 mm/rev. Depth of cut from 2 to 7 mm. Double-sided sharp cutting edge with a 13° positive rake angle for machining high temperature alloys at ap < 6 mm. 198 ISCAR