201 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.197

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 197 0201 ENG Lab2u

unn USER GUIDE Chipformers for Finishing F3P Chipformer U 1 7 a0.1 6° 2.5° r NF Chipformer 1 1- 0.4 - WF Chipformer .7 SL if V Double-sided insert with a positive rack angle to reduce cutting forces for finish machining on steel. Double-sided insert with a positive rake angle for finish machining on stainless steel. Its unique deflector geometry with a wavy surface prevents chip hammering. A unique super-finishing chipformer that controls chip flow at very low feeds and cutting depths. Designed to reduce crater wear. Double-sided for semi-finishing and finishing applications. Low cutting forces are due to a very sharp edge and positive rake. Wiper geometry for high feed finishing on soft and gummy materials. Small depths of cut. High positive rake and a special edge preparation used for rough and finish turning on high temperature alloys. Excellent performance on parts such as automotive valves. Chipformers for Medium Machining TF Chipformer 1 1.8 w J Double-sided insert for medium machining on steel with a reinforced cutting edge to increase tool life. Double-sided insert for medium machining on stainless steel with a reinforced cutting edge that prevents notch wear at tight radii to increase tool life. Double-sided positive rake angles to prevent strain hardening. The rake angle varies along the edge to a negative angle which prevents chipping Special design reduces cratering. Used for carbon and alloy steel, stainless steel and high-temp alloys. 197 ISOTURN INSERTS