173 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.169

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 169 0173 ENG Lab2u

SSGTURN TPGT-SP Super Positive Triangular Inserts with 11° Clearance for Fine Boring and Finish Turning Designation TPGT 110202-SP Dimensions Tough Hard Recommended Machining Data l di S r d1 IC908 0 05 IC ap (mm) f (mm/rev) 11.00 6.35 2.38 0.20 3.00 0.40-1.00 0.05-0.15 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: E-STFPR/L-HEAD (97) TPMT Triangular 11° Positive Inserts with a Positive Chipformer Exerting Low Cutting Forces for Internal Finish Turning 95° 3 4 S3 Dimensions Tough Hard Designation l di S r d1 IC830 IC635 2 0 5 IC IC8350 IC8250 IC8150 IC520M IC20 IC806 0 8 IC IC907 ap (mm)(1) f (mm/rev)(1) TPMT 110202 11.00 6.35 2.38 0.20 3.00 0.20-2.00 0.05-0.25 TPMT 110204 11.00 6.35 2.38 0.40 3.00 1.00-3.00 0.12-0.30 TPMT 110208 11.00 6.35 2.38 0.80 3.00 1.00-4.00 0.15-0.30 TPMT 160304 16.50 9.52 3.18 0.40 4.30 1.00-4.00 0.12-0.30 TPMT 160308 16.50 9.52 3.18 0.80 4.30 5.00-12.00 0.15-0.35 Recommended Machining Data For cutting speed recommendations, see pages 197-212 (1) For turning For tools, see pages: A/E/S-STFPR/L (97) A/S-STLPR/L (98) E-STFPR/L-HEAD (97) i oynwzi TPMT-PF Triangular 11° Positive Inserts for Semi-Finishing and Finishing Applications Dimensions Tough Hard Recommended Machining Data Designation l diM) S r d1 IC8250 IC8150 ap (mm) f (mm/rev) TPMT 110204-PF 11.00 6.35 2.38 0.40 3.00 0.50-3.00 0.10-0.30 For user guide and cutting speed recommendations, see pages 197-212 (1) Actual di=6.28, to be used in 6.35mm pocket size For tools, see pages: A/E/S-STFPR/L (97) A/S-STLPR/L (98) E-STFPR/L-HEAD (97) di S 169 ISOTURN INSERTS