163 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.159

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 159 0163 ENG Lab2u

T-LOCK DCMT-M3M-SL 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Machining Stainless and Low Carbon Steel Dimensions Tough Hard Recommended Machining Data Designation l di S r d1 IC6025 IC6015 ap (mm) f (mm/rev) DCMT 13T508-M3M-SL 13.40 11.00 5.11 0.80 4.50 0.90-3.50 0.10-0.25 DCMT 13T512-M3M-SL 13.40 11.00 5.11 1.20 4.50 0.90-3.50 0.15-0.30 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: A-SDUCR/L-13-SL (92) C -SDJCR/L-13-SL-JHP (50) C -SDNCN-13-SL-JHP (53) SDACR/L-13S-SL-JHP (52) SDJCR/L-13-SL (49) SDNCN-13-SL (53) DCMT 13T508-M3M-SL Application Range ap mm 4 3.5 3 2.5 2 1.5 1 0.5 A M 13M 0.1 0.15 0.2 0.25 0.3 0.35 f mm/rev Unique deflector design Strong radius Reinforced cutting edge prevents notch wear Positive rake angle for smooth cutting and reducing cutting forces T-LOCK DCMT-PF-SL 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Finish Turning on Soft Materials Exotic Alloys Dimensions Recommended Machining Data Designation l di S r d1 IC8150 ap (mm) f (mm/rev) DCMT 13T504-PF-SL 13.40 11.00 5.11 0.40 4.50 0.50-3.00 0.05-0.25 DCMT 13T508-PF-SL 13.40 11.00 5.11 0.80 4.50 0.70-3.00 0.05-0.25 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: A-SDUCR/L-13-SL (92) C -SDJCR/L-13-SL-JHP (50) SDNCN-13-SL (53) C -SDNCN-13-SL-JHP (53) SDACR/L-13S-SL-JHP (52) SDJCR/L-13-SL (49) 159 ISOTURN INSERTS