162 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.158

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 158 0162 ENG Lab2u

ISOTURN INSERTS T-LOCK DCMT-F3P-SL 55° Rhombic Inserts with a Positive Flank with a Locating Bottom Ridge for Semi-Finishing and Finishing on Steel Dimensions Tough Hard Recommended Machining Data Designation l di S r d1 IC8250 IC8150 ap (mm) f (mm/rev) DCMT 13T504-F3P-SL 13.40 11.00 5.11 0.40 4.50 0.50-3.00 0.05-0.25 DCMT 13T508-F3P-SL 13.40 11.00 5.11 0.80 4.50 0.90-3.50 0.10-0.25 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: A-SDUCR/L-13-SL (92) C -SDJCR/L-13-SL-JHP (50) C -SDNCN-13-SL-JHP (53) SDACR/L-13S-SL-JHP (52) SDJCR/L-13-SL (49) SDNCN-13-SL (53) Ground surface for high rigidity and accuracy Unique deflector for chip control at low cutting conditions Positive rake angle for smooth cutting and reducing cutting forces Wavy surface to prevent chip hammering ap mm 4.5 4 3.5 3 2.5 2 1.5 1 0.5 DCMT 13T504-F3P-SL Application Range F3F 0.10 0.15 0.20 0.25 0.30 0.35 “ f mm/rev ISGff<tK DCMT-F3P 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Steel Dimensions Tough Hard Recommended Machining Data Designation l di S r d1 IC8250 IC8150 IC520N 0 8 IC ap (mm) f (mm/rev) DCMT 070202-F3P 7.70 6.35 2.38 0.20 2.80 0.06-1.50 0.03-0.12 DCMT 070204-F3P 7.70 6.35 2.38 0.40 2.80 0.08-1.50 0.05-0.18 DCMT 11T302-F3P 11.60 9.52 3.97 0.20 4.40 0.08-2.00 0.04-0.16 DCMT 11T304-F3P 11.60 9.52 3.97 0.40 4.40 0.11-2.00 0.06-0.25 DCMT 11T308-F3P 11.60 9.52 3.97 0.80 4.40 0.15-2.00 0.08-0.32 For user guide and cutting speed recommendations, see pages 197-212 For tools, see pages: A/E/S-SDUCR/L (92) C -SDJCR-JHP (51) C -SDJCR/L (50) C -SDNCN (54) E-SDUCR/L-HEAD (93) IM-SDNCN (54) PDACR/L-JHP (52) PDACR/L-S (49) SDACR/L (51) SDHCR/L (51) SDJCR-PAD (51) SDJCR/L (50) SDNCN (54) PDACR/L-JHP-MC (53) 158 ISCAR