162 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.162

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 162 0162 ENG Lab2u

Hoffmann Group 47 HSS E-PM DIN 5156 DIN 13 a 133315 4asat M Through and blind hole machine taps Sturdy version. Recommendation: For very hard steels we recommend deviating from the DIN data (see table) by drilling the tapping hole 0 0.05 to 0.3 mm larger. For use only with a length compensation chuck - even on machines with synchronised spindle drives. Suitable for/ vc m/min Alu plastics oQ£L Alu cast >1D%SI X <500N X < 750 N X <900N X < 1100 N X <1400 N X <55 HRC X < 60 HRC X <65 HRC X <67 HRC X <70 HRC INOX <900 N INOX > 900 N Ti > 850 N Graphite Graphite GRP CRP 6 6 i c ISO code nri N rri P ”1 P ”1 P H m m 133315 12 7 2 15 i inches 133315 Machine tap TiCN 160.38 215.82 269.28 371.25 Threads per inch 28 19 19 14 Thread 0 mm 9.73 13.16 16.66 20.96 mm 8.8 11.8 15.25 19 DIN 371 -4- 1 H <2xD Solid carbide machine tap for through and blind holes Especially sturdy design. For use in heavy duty applications. Application: For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection). For use only with a length compensation chuck - even on machines with synchronised spindle drives. Recommendation: For very hard steels we recommend deviating from the DIN data (see table) by drilling the tapping hole 0 0.05 to 0.3 mm larger. 133320 Suitable for/ v, m/min Alu plastiu qSDEL, Alu cast >l0%5i X < 500 N X < 750 N X <900N X < 1100 N X <1400 N X <55 HRC X <60 HRC X <65 HRC X <67 HRC X <70 HRC INOX <900 N INOX > 900 N Ti > 850 N Graphite GRP CRP Uni 6 i i c ISO code nri rri rri P H rri 133320 3 2 1 18 Solid carbide machine tap TiAIN 351.45 412.83 28 19 mm 9.73 13.16 mm 8 11 mm 8.8 11.8 55° 5756 G32E i 4 i DIN HSS £3xD HSS E i&Gaianf Through hole machine tap for stainless steels Strong spiral point. Guide section with oil grooves, but without chip flutes. Size G1/8-G5/8 - HSS-E Size G3/4; G1 - HSS Advantage: Particularly strong, optimum self-guidance and no recutting when reversed. Application: For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection). 13 3325 Oil groove Guide thread Lead-in Taperlead Suitable for/ vc m/min Alu plastics oQ£2 Alu cast > 10% 5i X < 500 N X < 750 N X < 900 N X < 1100 N X <1400 N X <55 HRC X <60 HRC X <65 HRC X <67 HRC X <70 HRC INOX <900 N INOX >900 N Ti > 850 N CuZn Uni 6 6 ISO code nri rri rri P H rri 133325 13 15 15 15 6 13 O o inch 133325 Machine tap Threads per inch Thread 0 29.01 39.11 47.82 68.31 91.28 112.86 179.19 28 19 19 14 14 14 11 mm 9.73 13.16 16.66 20.96 22.91 26.44 33.25 mm 8.8 11.8 15.25 19 21 24.5 30.75 162