334 Каталог HOFFMANN GROUP 2016 Слесарно-монтажный и измерительный инструмент Вер. 47 ENG Стр.334

Каталог HOFFMANN GROUP 2016 Слесарный и мерительный инструмент Стр. 334 0334 ENG Lab2u

Hoffmann Group 47 tXBfiiJ Diamond cutting discs for wet and dry cutting Diamond cutting discs for wet and dry cutting. Bore 0 22.23 mm. High cutting performance of diamonds gives short cutting times. Extremely long working life, fewer disc changes. Unvarying diameter, always cuts to the full depth. Hardly any disc wear, reducing dust generation. Application: For cutting all common building materials such as concrete (even reinforced), bricks, natural stone, tiles, ceramics, steel etc. Note: Diamond coating already pre-sharpened. Observe correct direction of rotation Other diamond cutting discs on request. For everyday use on all building materials such as concrete, bricks, natural stone etc. Directly sintered coating, hardened body (no wandering). Disc0 mm 115 125 180 230 1 569720 Diamond cutting disc STANDARD Universal 18.36 22.05 37.62 45.09 High-performance with lOor 12 mm coating height. Suitable for all building materials, long working life, protected against overheating. Disc 0 mm 125 230 s 569740 Diamond cutting disc PREMIUM High-performance 40.46 90.45 Maximum performance and working life due to new segment technology with optimised grit distribution. 20 - 30 % faster cutting with less vibration and clean cut edges. For general-purpose use on concrete, granite, abrasive materials, and steel. Coating height 14 mm. Disc0 mm 230 HfWfCWM 4 ini diamond cutting disc PREMIUM Premium 115.20 Extremely free-cutting, for short cutting times, reduced load on the machine and clean cuts. Protected against overheating. Extra thin, coating thickness 1.2 mm (0 115 /125) and 1.9 mm (0 180 / 230). Disc0 mm 115 125 180 i 230 £56 Diamond cut-off disc PREMIUM Fast Cut 32.85 37.44 71.24 85.41 Tile disc with continuous cutting edge, disc thickness 1.2 mm, very free-cutting geometry, 10 mm coating width. Especially for tiles and granite slabs. Disc0 mm 115 1 230 I Diamond cut-off disc PREMIUM Tiles 29.70 63.90 Masonry cutting disc, cannot overheat, always replace in pairs. Disc0 mm 125 I 150 HfWfCWJW Diamond cutting disc PREMIUM Masonry cutter 36.45 48.42 fKBSU Dressing stick for diamond cutting discs Application: Cut a thin slice from the end of the dressing stick, working dry, This removes the outer layer of blunt diamonds and uncovers a fresh layer of sharp diamonds. Length Width Height mm Dressing stick for diamond cutting discs 13.82 320 55 25 569720 569740 569735 569730 569750 569770 334