306 Каталог HOFFMANN GROUP 2016 Слесарно-монтажный и измерительный инструмент Вер. 47 ENG Стр.306

Каталог HOFFMANN GROUP 2016 Слесарный и мерительный инструмент Стр. 306 0306 ENG Lab2u

Hoffmann Group 47 holex. Combi cloth / non-woven flap wheels Flap strips bonded on to the shank of the tool. Non-woven abrasive is combined with abrasive cloth to increases the abrasive effect of the fleece. Shank 0 6 mm. Application: For removal of dirt and oxide layers on metals as well as for matt finishing of Cr-Ni, other stainless steels, and also non-ferrous metals. 554920 Suitable for/ v, m/s X X X X X Carbide IN0X < 900 N < 1400 N <55 HRC <60 HRC <67 HRC Ti GG(G) CuZn Plastics &GRP Wood Stone Varnish Uni 55 4910-554930 Head 0xhead width mm 40x20 50x20 60x30 80x50 Grit equivalent h 554910 medium 3.94 4.08 5.54 6.89 9.01 10 100/80 h 55 4920 Flapwheel Fleece/doth fine 3.94 4.08 5.54 6.89 9.01 10 180/150 h 55 4930 very fine 3.94 4.08 5.54 6.89 9.01 10 280 / 240 recommended speed min-1 7500 6000 5000 5000 4000 maximum speed min-1 14000 11000 9000 9000 7000 Non-woven flap wheel Flap strips of fleece around the shank of the tool. Shank 0 6 mm. Application: For removal of dirt and oxide layers on metals as well as for matt finishing of Cr-Ni, other stainless steels, and also non-ferrous metals. Suitable for/ vc m/s AIMg X < 900 N X < 1400 N X <55 HRC X <60 HRC Carbide <67 HRC IN0X Ti 1 GG(G) CuZn Plastics & GRP Wood Stone Varnish Uni 4 554906-554970 O o O o O 55 4971-554973 o Non-woven flap wheel, zirconium aluminium oxide Especially wear-resistant and fine-structured fleece with Zirconium Aluminium Oxide (ZA). Ideal for use on stainless steel. ZA Head 0xhead width mm 30x20 40X20 60x30 80x50 o Grit equivalent Flapwheel Fleece (ZA) s 55 4906 fine 3.74 4.19 4.85 5.99 10.10 10 180 recommended speed min-1 7500 7500 6000 5000 4000 maximum speed min-1 14000 14000 11000 9000 7000 554906 Non-woven flap wheel, standard aluminium oxide Fleece impregnated with Aluminium Oxide (A). Creates a consistent matt finish. Head 0xhead width mm 30x20 40x20 50x20 60x30 80x50 Grit equivalent w 55 4950 medium 3.34 3.73 4.31 5.35 6.63 9.01 10 100 h 55 4960 I uni rf Flapwheel HOLCX- Fleece (A) fine 3.34 3.73 4.31 5.35 6.63 9.01 10 180 554970 very fine 3.34 3.73 4.31 5.35 6.63 9.01 10 280 recommended speed min-1 7500 7500 6000 5000 5000 4000 maximum speed min-1 14000 14000 11000 9000 9000 7000 554950 Non-woven flap wheel, silicon carbide The sharp-edged silicon carbide grit (SiC) provides aggressive grinding characteristics and a slightly lustrous finish. SiC Head 0xhead width mm 40x20 60x30 80x50 f Q Grit equivalent h 55 4971 medium 3.83 5.50 9.21 10 100 h 55 4972 ““ STS 3.83 5.50 9.21 10 180 h 55 4973 very fine 3.83 5.50 9.21 10 280 recommended speed min-1 7500 5000 4000 maximum speed min-1 14000 9000 7000 554971 306