Synchronised blind hole machine tap Garant with internal coolant supply M 60 Sturdy version with right-hand helix and shank to DIN 1835-B Special

Synchronised blind hole machine tap Garant with internal coolant supply M 60 Sturdy version with right-hand helix and shank to DIN 1835-B. Special geometry for universal applications on machines with synchronised spindle drive. The tap is controlled by the synchronising spindle of the machine. Applicable with emulsion (fat content minimum 8%). 13 6170- TiCN coated, for tapping into materials of high hardness and toughness. 13 6173- Form E (lead chamfer 1.5 -2 turns) for the deepest possible thread depths. Special TiAIN-S coating for optimum tool life. 13 6176- Special TiAIN coating and internal coolant supply for maximum tool life. HSS E ISO 2 6H i-3 i 136170 HSSE PM IS02X 6HX 1 1% 136173 Note For use on synchronised spindles, the GARANT quick-change tapping chuck No. 338100 - 8118 with minimum length adjustment (MLA) ensures highest process reliability. HSSE PM IS02X 6HX i-3-i 136176 Suitable for/ vc m/min Alu plastics g Alu cast >10% Si <500 N <750 N <900 N <1100N I -tFT <1400 N s&l s INOX <900 N INOX >900 N Ti >850 N GG(G) CuZn i Uni J r max min Air ISO code N P H K N 1 1 136170- 16 20 19 19 9 11 16 136173/6176- 32 32 33 32 20 12 7 11 9 30 in M 1 136170 fo HSS/E Form C 6H 1 136173 1 J&Earant' lind hole machine ta r synchronised spind HSSE-PM Form E 6HX 1 136176 es HSSE-PM IC/Form C 6HX E Uot mm 1 h 136170 mm I" 6 136173 136176 mm I 136173 136176 mm TICN TIAIN TiAIN mm M 2,5 0.45 70 6 6 4.9 2.05 M 3 0.50 70 6 6 4.9 2.5 M 4 0.70 70 6 6 4.9 3.3 M 5 0.80 70 6 6 4.9 4.2 M 6 1.00 80 6 6 4.9 5.0 M 8 1.25 90 8 8 6.2 6.8 M10 1.50 100 10 10 8.0 8.5 Ml 2 1.75 110 12 12 9.0 10.2 M16 2.00 110 16 12 9.0 14.0 M20 2.50 140 20 17.5 Garant Blind hole machine tap left-hand thread M-LH 60‘ HSS E DIN 371 -SM10 DIN 376 SM12 ISO DIN 13 ISO 2 6H i-3 i <3xD Version Left-hand cutting. With strong left-hand chip flutes, for optimum swarf evacuation. Note The GARANT micro lubrication system ensures the optimal and accurate distribution of the cutting oil. This eliminates the need for changeover to 8% emulsion. See No. 130100 size S. Maui Suitable for/ Vc m/min Alu plastics G Alu cast >10% Si <500 N <750 N <900 N I <1100N <1400 N s&l s Sc INOX <900 N INOX >900 N Ti >850 N GG(G) CuZn Gra G C 1 Uni _5f max min Air ISO code N P H K N 136180- 13 15 15 15 6 6 13 O M-LH 1 136180 I ifccamt Blind hole machine tap, left-hand thread vaporised mm Uot mm f mm 1 mm nn n M 3 0.50 56 3.5 2.7 2.5 M 4 0.70 63 4.5 3.4 3.3 M 5 0.80 70 6.0 4.9 4.2 M 6 1.00 80 6.0 4.9 5.0 M 8 1.25 90 8.0 6.2 6.8 M10 1.50 100 10.0 8.0 8.5 Ml 2 1.75 110 9.0 7.0 10.2 M14 2.00 110 11.0 9.0 12.0 M16 2.00 110 12.0 9.0 14.0 M20 2.50 140 16.0 12.0 17.5 Main catalogue Hoffmann Group 46 153 vkn Standard ISO DIN 13 P 40‘ 1835 B <3xD Version