1295 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.1295

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 1295 1295 ENG Lab2u

Garant Service tool case with i Solid die-cast aluminium frame with additional 3D aluminium bands for high stability and torsional stiffness. i All load-bearing parts are bolted directly to the die-cast aluminium frame, thereby a weakening of the plastic shell is avoided. i When the case lid is opened it is supported by 2 gas pressure springs and securely held at the limit of travel. j&Garant" Service tool case with die-cast aluminium frame - product characteristics die-cast aluminium frame Composite plastic (2 components) with nonslip surface (rubberised effect) - very strong -enormous impact resistance - unbreakable (suitable for air travel). 35 kg loading is possible due to the use of sturdy high-strength components. Pull-along version has 4-stage telescopic pull handle and free-running wheels with ball-bearings and springing. X-ABS mmm Version X-ABS is extremely impact resistant, tough and thus suitable for air travel. The soft surface is non-slip (rubberised effect) and does not damage surfaces. Powder-coated die-cast aluminium frame with 3D aluminium bands, integral toggle cylinder locks, and gas pressure springs for case lid positioning. 692950- Internal fitments 1 base shell including tool board with 10 elastic straps as a cover (No. 692980), 1 longitudinal divider (No. 692993) in the base shell, 1 tool board with 38 elastic straps on the front and rear (No. 692985), 1 tool board with 19 elastic straps and 1 securing pocket on the front and rear (No. 692986). 692955/2960- Internal fitments 1 base shell including tool board with 11 elastic straps as a cover (No. 692982), 1 longitudinal divider (No. 692993) in the base shell, 1 tool board with tool clips on the front and rear (No. 692988), 1 tool board with 23 elastic straps and 1 securing pocket on the front and rear (No. 692989). Note Case available with TSA lock on request. 692960 Ball-bearing sprung wheels, 0 82 mm 692950 Extendable telescopic handle with push-button operation 692950 69 2950 ifeGmnt” Service tool case with base shell and tool board 69 2955 i&Gmnt” Service tool case with base shell and tool board s 69 2960 I jfecmnt Service tool case with base shell and tool board pull handle and wheels internal dimensions lengthxwidthxheight (692950) Internal dimensions lengthxwidthxheight (692955,69 2960) Weight (69 2950) mm kq 460X300X180 470X350X200 5.8 Weight (69 2955) kq 6.8 Weight (69 2960) kg 8.1 Service tool case of HDPE with wheels and pull handle HDPE m. 25 Version Integral TSA locks (No. 692915) and feet, metal hinges, carrying handle, 2 ball bearing mounted wheels (0 100 mm). TSA locks When travelling to the USA these locks can be opened for searching and relocked by the US 'Transportation Security Administration" (TSA) using a master key. Forcible opening of the case (irreparably damaging the locks) for searching can thus be avoided. Internally fitted with stitched shaft pockets 1 dividable base shell, including tool board with 18 shaft pockets as cover. 2 small parts bins in the base shell (No. 692909). 1 tool board with 26 shaft pockets, 13 rubber straps and 1 pocket for small parts on the front and back. 2 document pockets, fixed to the cover. 3 fiQ oani; Service tool case 10 of HDPE with wheels and pull handle Internal dimensions lengthxwidthxheight mm 453X345X185 Weight kg 7.5 0 0 TSA locks, recommended when travelling in the USA. Extendable telescopic handle with push-button operation E)ouble-wall design Shaft pockets with elastic collar for optimal retention of the tools Main catalogue Hoffmann Group 46 1295