Indexable inserts Garant ceramic (0°) Version High quality, high-temperature ceramic tool material for reliable operation in materials that are h

Indexable inserts Garant ceramic (0°) Version High quality, high-temperature ceramic tool material for reliable operation in materials that are hard and difficult to machine. CER Suitable for/ vc m/min Alu plastics omu Alu cast >10% Si <500 N <750 N <900 N <1100 N <1400 N 900 N Ti >850 N GG(G) CuZn i Uni 0 -5 max ISO code N P H K N KU 7205 - 800 KB 7205 - 250 210 180 250 O KU 7410 - 200 KU 7415 - 300 Ceramic turning inserts with a hole Version KU 7205 Uncoated silicon nitride ceramic for machining grey cast iron materials (GG 25 - GG 40). KB 7205 Coated aluminium oxide titanium carbide ceramic for machining hard materials up to 68 HRC. Application range HART GG iff 25 5702 KU 7205 10 x 25 5703 KB 7205 10 1 25 5706 KU 7205 10 1255707 KB 7205 10 1255710 KU 7205 10 1255711 KB 7205 10 1255715 KU 7205 10 1255716 KB 7205 10 1255719 KU 7205 10 1255720 KB 7205 10 1255723 KU 7205 10 1255724 KB 7205 10 1255728 nrunfl KU 7205 10 1255729 jINu/A 1 ZgH-UO KB 7205 10 1255732 KU 7205 10 1255733 JINVjrt IZU IZ KB 7205 10 1255745 TNf A IfifWlfl KU 7205 10 1255746 IINvJrt lOLH-Uo KB 7205 10 1255750 KU 7205 10 1255751 1 INVJtt lOU'HZ KB 7205 10 1255756 VNGA 160404 KB 7205 10 1255761 VNGA 160408 KB 7205 10 1 Cutting edge version 0.2 mmx25° 0.2 mmx20° 3p mm 0.1 - 0.9 0.5 - 2.5 f mm/rev 0.05-0.15 0.10-0.20 Ceramic turning inserts without hole KB 7205 KU 7205 Version 25 5765- KB 7205 Coated aluminium oxide titanium carbide ceramic for machining hard materials up to 68 HRC. 25 5766- KU 7410 Sialon ceramic for roughing and finishing high-temperature materials, even with interrupted cutting. 25 5767- KU 7415 Aluminium oxide silicon carbide whisker ceramic for roughing and finishing exotic materials such as Inconel, Stellite. 25 5768- KU 7205 Uncoated silicon nitride ceramic for machining grey cast iron materials (GG 25 - GG 40). Note Up to 16 cutting edges if both sides are used. u KU 7410 KU 7415 Application range HART s GG 0 Cutting edge version f mm/rev 3p mm 1255765 KB 7205 10 0.1 mmx20° 0.05-0.15 0.1 - 0.8 1255766 RNfN lofrmn KU 7410 10 0.1 mmx20° 0.2 - 0.5 0.1-1 nlNvjIN IZU/UU 1255767 KU 7415 10 0.05 mmx20° 0.3 - 0.5 0.1 - 1 1255768 KU 7205 10 0.1 mmx20° 0.1 - 0.2 0.5 - 2.5 Main catalogue Hoffmann Group 46 525