Fluteless machine tap Garant HOLEX with oil grooves M 60 DIN 2174 optimal lubrication effect even in deeper threads 13 9171 - Special TiAIN coati

Fluteless machine tap Garant HOLEX with oil grooves M 60 DIN 2174 optimal lubrication effect even in deeper threads. 13 9171 - Special TiAIN coating, highly suitable for aluminium alloys. 13 9171/9175/9178/9185/9187/9190 - The innovative polygon form permits a wide application spectrum. The multi-function layer structure achieves maximum service life even in high-tensile materials. 13 9171-9187- Tolerance class ISO 2X/6HX. 13 9178/9182 Size M2,6- with old DIN profile. 13 9185 - Form E (lead-in 1.5-2 turns) for deep threads with short run-out. The thread is tapped almost to the bottom of the hole. 13 9187 - With internal coolant supply laterally from the grooves; permits maximum tool life when threading through holes and blind holes. 13 9190/9192 - Tolerance class ISO 3X/6GX Oversize 0.02 - 0.04 mm. Application 13 9190/9192- For components which are galvanised after threading or which shrink slightly when hardened. Note The GARANT micro lubrication system ensures the optimal and accurate distribution of the cutting oil. This eliminates the need for changeover to 8% emulsion. See No. 130100 size S. HSSE PM IS02X 6HX i-3-i HSSE PM IS02X 6HX i 3 i HSSE PM IS02X 6HX i-3-i HSS E IS02X 6HX i 3 i 1 HSSE PM IS02X 6HX r i iIVS HSSE PM IS02X 6HX i-3-i HSSE PM IS0 3X 6GX 1 3 1 HSS E IS03X 6GX i 3 i 139192 Suitable for / vc m/min Alu plastics Alu cast >10% Si <500 N <750 N <900 N <1100N <1400 N 2 Sc Ec INOX <900 N INOX >900 N Ti >850 N GG(G) CuZn I Uni max min Air ISO code N P H K N 139171 - 42 42 28 32 139175- 32 27 22 17 12 7 22 13 9178- 42 42 37 32 27 22 17 12 22 139182- 23 23 22 22 11 12 o 13 9185- 42 42 27 37 32 27 22 17 12 22 13 9187- 42 42 35 37 32 29 27 22 17 27 13 9190- 42 42 37 32 27 22 17 12 22 13 9192- 23 23 22 22 11 12 o M 13 9171 713 9175 n 3 9178 5139182 7139185 i 39187 i139190 7139197 fjj T 1 J&Gmat11 Fluteless machine tap with oil grooves HOLEX Fluteless machine tap with oil grooves 1 Garant Fluteless machine tap with oil grooves j&EwinP 1 Fluteless machine tap with oil grooves HQLCX. Fluteless machine tap with oil grooves Uot 11 B (F er va te Bn lu ce e) HSSE-PM Form C 6HX HSSE-PM Form C 6HX HSSE-PM Form C 6HX HSS/E Form C 6HX HSSE-PM Form E 6HX HSSE-PM IC/Form C 6HX HSSE-PM Form C 6GX HSS/E Form C 6GX TiAIN TIN TiN TiAIN TiN TiAIN mm M 2 0.40 45 2.8 2.1 1.85 M 2,5 0.45 50 2.8 2.1 2.30 M 2,6 0.45 50 2.8 2.1 2.40 M 3 0.50 56 3.5 2.7 2.80 M 3,5 0.60 56 4.0 3.0 3.25 M 4 0.70 63 4.5 3.4 3.70 M 5 0.80 70 6.0 4.9 4.65 M 6 1.00 80 6.0 4.9 5.55 M 8 1.25 90 8.0 6.2 7.45 M10 1.50 100 10.0 8.0 9.35 M12 1.75 110 9.0 7.0 11.20 M14 2.00 110 11.0 9.0 13.10 M16 2.00 110 12.0 9.0 15.10 M20 2.50 140 16.0 12.0 18.85 Main catalogue Hoffmann Group 46 167 ISO DIN 13 <3xD Version DIN 2174 ( DIN 371 s; M10; DIN 376 2 M12). With oil grooves;