635 Каталог GEDORE 2014 Профессиональный слесарный инструмент и оборудование Стр.633

Каталог GEDORE 2014 Слесарный инструмент Стр. 633 0635 ENG Lab2u

Safety notes for hammers Wear safety glasses and safety gloves Use the hammer only for its intended purpose Never misuse the hammer as a lever Before starting work check that the hammer head is securely attached to the shaft Select the appropriate type and size of hammer for the work to be carried out Never hit two hammers together Never use steel hammers on workpieces harder than 46 HRC Use suitable plastic-faced hammers for this In case of doubt the healthier choice is a suitable plastic-faced hammer. Avoid bouncing blows Use only the work faces of the hammer Blows with the side face damage the non-hardened hammer eye. This can loosen the grip of the shaft in the hammer head. If a burr forms on the pein or face of the hammer head this must be immediately removed. Failure to do this can pose the risk of splintering when the hammer is in use. Grip the hammer shaft as far away from the hammer head as possible This improves the impact effect and avoids vibrations. Do not store hammers with wooden shafts in warm dry environments Wood is a natural product. Dry warm storage conditions cause the shaft to lose moisture and shrink so that the hammer shaft is no longer a tight fit in the hammer head. Opposite storage conditions also have a negative effect on the wooden shaft. Do not store the wooden shaft in too damp conditions Too much moisture causes the wooden shaft to swell up and damages the wooden fibres. This can result in the wooden shaft snapping behind the eye area. Use only approved non-sparking hammers for work in explosion-hazard areas Use only suitable GEDORE replacement shafts and wedges. WORK M Safety goggles Read the operating instructions. Ensure that your safety goggles are suitable for the respective task to be performed. Examine your safety goggles for damage before use. Damaged safety goggles must be replaced. Store safety goggles in dry areas. Use the black plastic bag provided for this purpose. This will help you to avoid scratches on the lenses. Clean the lenses regularly under running water not when dry. Do not wear safety goggles on top of standard spectacles. Mechanical effects can be transferred which may be dangerous. WOBK Safety notes For engines with ignition coils integrated in the spark-plug connector (coil-on-plug) use only spark-plug sockets with retainer springs (Nos. 50 - 59) Do not use magnetic spark-plug spanners on coil-on-plug spark plugs This can result in control unit faults Ear protection Read the operating instructions. Ensure that your ear protection is suitable for the respective task to be performed. Examine your ear protection for damage before use. Ear protection displaying damage must be replaced. Wear ear protection for the entire duration of your stay in noisy areas. Store your ear protection in a clean and dry place. Avoid impact against the earpieces. Otherwise this can lead to a noise level which is harmful for your ears. WOBK Work gloves Read the operating instructions. Ensure that your work gloves are suitable for the respective task to be performed. Examine your work gloves for damage before use. Damaged work gloves must be replaced. Only work using work gloves which fit your hands perfectly. Store your work gloves in a clean and dry place. Pliers Wear protective goggles when working with pliers Ejected bits of wire and circlips not correctly positioned in the tip of the pliers pose a risk to your eyes Check on the jaws for wear and tear Worn jaws result in slipping and thus in accidents. The joint of the pliers is not to have any noticeable play Exceptions are the sliding joints. When cutting wire choose pliers that match the wire diameter and wire hardness Never use pliers as hammers Only insulated and tested pliers are to be used when working on electrical equipment Grip wrenches are only for briefly fixing workpieces 633