488 Каталог GEDORE 2014 Профессиональный слесарный инструмент и оборудование Стр.486

Каталог GEDORE 2014 Слесарный инструмент Стр. 486 0488 ENG Lab2u

GEDORE Gu Rubber Sta Steel V Version 1 SAFE ERGONOMIC UNBEATABLE PRICE-PERFORMANCE RATIO Forged hammer head acc. to DIN 1193 Two serrated gripping zones. Knurled non-sliding Equally easy to use with either short or long arms. Rubber handle reinforced inside with hardened steel tube. Stud-type handle and ergonomically adapted grip diameter. 900 mm handle length 100 mm in excess of the DIN requirement - ensures more powerful strikes from the same force applied. UNBEATABLE PRICE-PERFORMANCE RATIO since the hammer is very durable Hammer head and steel tube form a keyed connection. A safety extra The reinforcing bulge at the transition point from hammer handle to head ensures an even spread of forces throughout the hammer head. NON-TAXING FATIGUE- FREE WORKING HIGHEST SAFETY since the hammer head is intractably fitted with the handle since value DESIGNATED 1200 kg (12000 N) value ACTUAL 9 GuStaV 14650 kg (145500 N) the test had to be stopped at this figure as the machine no longer had any "grappling point" due to the abraded rubber at the steel handle. The hammer head remained firmly fitted to the handle. since a hardened steel tube is mounted in the handle. The result is an unbreakable hammer when correctly used. ERGONOMIC since optimum handle geometry 100 mm longer than the DIN requirement greater impact power from the same force applied Stud at the end of the handle ensures that proper gripping handle The handle diameter is perfectly adjusted to the geometry of one's hand since low-on-vibration The keyed connection between hammer head and steel tube in the handle is rubber-jacketed. As a result the rubber absorbs much of the vibration arising on impact. The rubber layervulcanised on the handle provides an extremely low modulus of elasticity and in turn absorbs most of the remaining vibrations. Test findings Ingenieurburo fur Ergonomie 67824 Feilbingert 9 GuStaV has the same positive vibration features as a comparable wooden-shaft hammer. SLEDGE HAMMER with rubber grip and steel tube handle Resilient practically unbreakable low-on-vibration hammer Forged hammerhead acc.to DIN 1193 Head ground and clearvarnished Rubber handle reinforced inside with hardened steel tube Hammer head and steel tube form a keyed connection. A safety extra Vibrations are absorbed by the rubber handle to the same extent as with wooden shafts 900 mm handle length 100 mm in excess of the DIN requirement - ensures more powerful strikes from the same force applied Resistant to petrol and oil Two serrated gripping zones. Knurled non-sliding Equally easy to use with either short or long arms Stud-type handle and ergonomically adapted grip diameter T he reinforcing bulge at the transition point from hammer handle to head ensures an even spread of forces in the hammer eye DBGM ( German Utility Patent) g 5000 y mm 900 0 Code 7.0 2250128 No. 9 GuStaV-5 486