| Обновлено 2020-05-02 09:23:47 |
|
Слесарно-монтажный ручной инструмент / Hand tools FACOM | Каталог FACOM 2013 Ручной инструмент и оборудование (Всего 1108 стр.) |
|||||
921 Каталог FACOM 2013 Профессиональный ручной инструмент и оборудование Стр.895 |
|||||
Каталог FACOM 2013 Инструмент Оборудование Стр. 895 0921 ENG Lab2u Auto electrics Automotive 19 Battery charger BATTERY CHARGERS USE"NEW GENERATION" CHARGERS BC128A T Anti PeakTechnology Standardisation of electronic equipment in vehicles requires the use of chargers which protect the battery and electronic equipment of vehicles. With a FACOM charger compliant with DIN 40839 work safely and recharge batteries without disconnecting them from the vehicle. No risk even when reversing polarity. Automatic Adaptative Charge The charger adapts the charging strategy permanently to the battery. Smart charging offers the following benefits Safe fast charging. Charging secured for the battery and vehicle electronics. Charges batteries at 100 capacity. Recharges severely discharged batteries. Tester Inside Don't waste time tester built into FACOM chargers no more useless charging. If the battery is definitely out of service the charger tells you when connecting to the battery. An additional test cycle is run at the end of each charge. This test reduces after-sales return. With high frequency regeneration before charging battery plate sulphatation is reduced as the battery is in the best possible condition to be charged. Regeneration BOOST mode if the battery is highly discharged or was not used for a long period the BOOST mode can save borderline batteries. Regeneration mode at the start of each charge a sulphate elimination cycle is applied to the battery elements to prepare it to receive the charge. 3 Facom 895 |
|||||
См.также / See also : |
|||||
Отклонения размеров / Fit tolerance table |
Соотношение твердостей Таблица / Hardness equivalent table |
||||
Типы резьб / Thread types and applications |
Аналоги сталей / Workpiece material conversion table |
||||
Отверстия под резьбу / Tap drill sizes |
Обороты в скорость / Surface speed to RPM conversion |
||||
Перевод дюймов в мм / Inches to mm Conversion table |
Перевод единиц в систему СИ / SI unit conversion table |
||||
| |
|||||
| FACOM | |||||
| |
|||||
![]() Каталог FACOM 2014 Профессиональный слесарный инструмент (1106 страниц) |
|||||
![]() Каталог FACOM 2013 Ручной инструмент и оборудование (англ. яз.) (1108 страниц) |
|||||
![]() Каталог FACOM 2009 Ручной инструмент (869 страниц) |
![]() Каталог FACOM 2005 Профессиональный ручной инструмент (англ. яз.) (899 страниц) |
||||
| |
|||||
|
Каталоги ручного инструмента / Hand tools catalogs |
|||||
| Каталог FACOM 2013 Ручной инструмент и оборудование (Всего 1108 стр.) | |||||
| |
|||||
918 | 919 | 920 | 922 | 923 | 924 |
|
Lab2U | Catalogs | Tap drill sizes | Speed to RPM | Material table Разработчики сайта / Developers of site |
|
Поиск на сайте Lab2u.ru с помощью поисковых систем ЯНДЕКС, BING, GOOGLE:
|
||
|
|
||









