1293 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.M137

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. M137 1293 Lab2u

AXD4000 Selection of insert It is necessary to choose the best insert according to the cutting conditions. Please select an insert from the tables below. 1st recommendation for stable cutting condition is the GL breaker with a strong cutting edge. Selection of insert according to the feed per tooth and the required cutting depth ap (mm) 15 10 GM breaker GL breaker ae (mm) D 3 D/4 Selection of insert according to the width of cut and the required cutting depth GM breaker GL breaker fz(mm/t.) 1st recommendation for machining aluminium alloys is GL breaker. Under high-load conditions such as deep or high feed cutting, it is advisable to use the GM breaker. ae(mm) Selection of insert according to cutting edge GL TF15/LC15TF Low cutting resistance TF15 Tougher cutting edge MP9120 Tougher cutting edge & wear resistance Machining of difficult-to-cut materials & aluminium Selection of insert according to wear resistance r Mp6' GM 120 MP9120 Wear resistance Super high speed cutting High SI (Cast aluminium) Heavy interrupted machining Fracture resistance Feed per tooth, Intermittent M137 INDEXABLE MILLING