408 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.E028

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. E028 0408 Lab2u

BORING BARS s E TYPE BORING BARS The minimum cutting diameter is from 011. ISO standard. 7° positive insert. Screw-on type. i/d is 3 to 5 times the diameter (Carbide shank is 7 times the diameter). STFC TCOOinserts KAPR KAPR 91, GAMF DMIN ECA 60" LDRED LF : H DCON Right hand tool holder shown. Finish FP A (09,11,16) Medium MP (09,11,16) Finish FM (09,11,16) Medium MM (09,11,16) Light LP (09,11,16) Flat top A (11,16) Stock Dimensions(mm) Order Number Insert Number DCON LF LDRED WF H GAMF DMIN R L Clamp Screw Wrench S08FSTFCR/L09 TCMT TCGW 0902.: 8 80 12 6 7 15° 11 TS22 TKY06F S10HSTFCR/L11 110200 10 100 16 7 9 13° 13 TS25 TKY08F S12KSTFCR/L11 TCMW TCMT 1102m 12 125 20 9 11 10° 16 TS25 TKY08F S16MSTFCR/L11 1102m 16 150 25 11 14 7° 20 TS25 TKY08F S20QSTFCR/L16 TCGW TCGT 16T300 20 180 32 13 18 7° 25 TS4 TKY15F S25RSTFCR/L16 16T300 25 200 40 17 23 5° 32 TS4 TKY15F S32SSTFCR/L16 16T300 32 250 50 22 30 5° 40 TS4 TKY15F Light (09,11,16) CBN/PCD A (09,11,16) Clamp Torque (N m): TS22=0.6, TS25=1.0, TS4=3.5 KAPR Jgaa DMIN Carbide shank TC AjinSSrtS uECA 60° Wfl KAPR 91 I/IF LDRED LF DCON Right hand tool holder only. Finish FP (09,11,16) Medium (09,11,16) Finish FM (09,11,16) Medium MM (09,11,16) Light (09,11,16) Flat top A (11,16) Stock Dimensions(mm) Order Number Insert Number DCON LF LDRED WF H GAMF DMIN R Clamp Screw Wrench C08HSTFCR09 TCMT TCGW 0902m 8 100 12 6 7 15° 11 TS22 TKY06F C10KSTFCR11 1102m 10 125 16 7 9 13° 13 TS25 TKY08F C12MSTFCR11 TCMW 1102m 12 150 20 9 11 10° 16 TS25 TKY08F C16RSTFCR11 TCMT TCGW 1102m 16 200 25 11 14 7° 20 TS25 TKY08F C20SSTFCR16 TCGT 16T300 20 250 32 13 18 7° 25 TS4 TKY15F C25TSTFCR16 16T300 25 300 40 17 23 5° 32 TS4 TKY15F Light (09,11,16) CBN/PCD (11) Clamp Torque (N m): TS22=0.6, TS25=1.0, TS4=3.5 Note 1) The insert photos are only examples. The letters refer to the chip breaker and the dimension refers to the inscribed circle. Note 2) Dimensions shown for insert corner RE 0.4.(Model of -fr Mark is RE 0.8) Note 3) When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder. : Inventory maintained in Japan. E028 TCOO type inserts >- A160 A162 CBN & PCD inserts > B057, B074