405 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.E025

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. E025 0405 Lab2u

Ftype BORING BARS FSTU1 The minimum cutting diameter is from 010. 11 "positive insert. Screw-on type. i/d is 3 to 5 times the diameter (Carbide shank is 7 times the diameter). TPOOinserts KAPR o; KAPR 93" GAMF LDRED LF H DCON Right hand tool holder shown. Finish R/L (08,09,11) PCD R/L-F (09,11) Order Number Stock Insert Number Dimensions(mm) DCON LF LDRED WF H GAMF DMIN R L Clamp Screw Wrench FSTU108R/L 080200 8 125 18 5 7 15° 10 CS200T TKY06F FSTU110R/L TPGX 090200 10 150 22 6 9 13° 12 CS250T TKY08F FSTU112R/L TPMX 090200 12 180 25 8 11 10° 16 CS250T TKY08F FSTU116R/L 110300 16 200 30 11 14 7° 22 CS300890T TKY08F Flat Top m (08,09,11) CBN/PCD A (08,09,11) Clamp Torque (N m): CS200T=0.6, CS250T=1.0, CS300890T=1.0 FSTU2 Carbide shank TPOOinserts KAPR KAPR 93’ GAMF LDRED LF H DCON Right hand tool holder shown. Finish R/L A (08,09,11) PCD R/L-F (09,11) Order Number Stock Insert Number Dimensions(mm) ft DCON LF LDRED WF H GAMF DMIN R L Clamp Screw Wrench FSTU208R/L 080200 8 125 13 5 7 15° 10 CS200T TKY06F FSTU210R/L TPGX 090200 10 150 16 6 9 13° 12 CS250T TKY08F FSTU212R/L TPMX 090200 12 180 19 8 11 10° 16 CS250T TKY08F FSTU216R/L 110300 16 200 26 11 14 7° 22 CS300890T TKY08F Flat Top A (08,09,11) CBN/PCD (08,09,11) Clamp Torque (N m): CS200T=0.6, CS250T=1.0, CS300890T=1.0 RECOMMENDED CUTTING CONDITIONS Steel Shank l/d<3 l/d=3 4 (Shank Diameter > 25mm) Carbide Shank I/d 2 5 l/d=6 7 Work Material Hardness Cutting Mode Cutting Speed (m/min) Feed (mm/rev) Depth of Cut (mm) Cutting Speed (m/min) Feed (mm/rev) Depth of Cut (mm) P Carbon Steel 180 350HB Light Cutting 130 (90-160) 0.1 (0.05-0.15) 0.2 120 (80-150) 0.1 (0.05-0.15) 0.2 Alloy Steel Medium Cutting 90 (60-120) 0.25 (0.15-0.35) -3.0 80 (50-110) 0.15 (0.1 0.2) -1.5 M Stainless Steel 200HB Light Cutting 140(100-180) 0.1 (0.05-0.15) 0.2 140 (100-180) 0.1 (0.05-0.15) 0.2 Medium Cutting 70 (50-90) 0.2 (0.15-0.25) -2.0 60 (40-80) 0.15 (0.1 0.2) -1.0 N Aluminium Alloy Light Cutting 300 (200-400) 0.1 (0.05-0.15) 0.2 300 (200-400) 0.1 (0.05-0.15) 0.2 Medium Cutting 200 (150-250) 0.1 (0.05-0.15) -2.0 200 (150-250) 0.1 (0.05-0.15) -1.5 Note 1) The insert photos are only examples. The letters refer to the chip breaker and the dimension refers to the inscribed circle. Note 2) Dimensions shown for insert corner RE 0.4. Note 3) When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder. TPOO type inserts >-A165, A166 SPARE PARTS > 0001 CBN & PCD inserts > B059, B060, B075, B076 TECHNICAL DATA > R001 E E025 BORING BARS