309 Каталог MAHR 2007 Линейно-угловые средства измерений Измерительный инструмент Стр.9-59

Каталог MAHR 2007 Линейно-угловые средства измерений Стр. 9-59 0309 ENG Lab2u

MaraMeter. Indicating Measuring Instruments for Inside Measurements Handles Housing All 1280P gages have a removable handle as a part of the Indicator Housing. All 1282P gages can be equipped with a handle which projects at 90 to the gage housing. 1282P gages with capacity 12-25 mm .50-1" are not normally furnished with a protective housing. Handles and Housings may be ordered separately. For Handles order HA-88 with AT-124 Adaptor. For Housings order EHG-1198. Gaging Extensions Specify the Reference Contact Gaging Extensions required from the table below. For all diameters below 50 mm 2" the Reference Contact is integral with each Extension. For diameters over 50 mm 2" the Reference Contact is separate and interchangeable among Extension Sets. 1282P-1W1 (Output Cable not included) Technical Data Diameter to be Extension Required Used on Gage Model measured Carbide Steel Numbers mm inch 12 - 16 .50 - .625" PT-562 PT-558 1280P-1xxx 16 - 19 .625 - .75" PT-567 PT-559 19 - 22 .75 - .875" PT-568 PT-560 1282P-1xxx 22 - 25 .875 -1" PT-557 PT-561 25 - 32 1 - 1.25" PT-554 PT-555 1280P-2xxx 32 - 38 1.25 - 1.50" PT-553 PT-556 38 - 45 1.50 - 1.75" PT-552 PT-569 1282P-2xxx 45 - 50 1.75 - 2" PT-550 PT-551 For the gaging diameters listed below select one Contact Point and at least one Extension Set. Contact Point Extension Used on Required Gage Models Carbide PT-156 1280P-3XXX Steel PT-2224 1282P-3XXX Extension Sets Diameter to be Extension Used on Measured Sets Gage Models mm inch 50 - 64 2 - 2.5" EX-222 64 - 76 2.5 - 3" EX-223 76 - 89 3 - 3.5" EX-224 1280P-3XXX 89 - 100 3.5 - 4" EX-225 100 - 127 4 - 5" EX-223 with EX-226 1282P-3XXX 127 - 152 5 - 6" EX-225 with EX-226 152 -178 6 - 7" EX-223 with EX-228 178 - 200 7 - 8" EX-225 with EX-228 I