Токарные пластины Mitsubishi TURNING INSERT

Токарные пластины Mitsubishi TURNING INSERT

Токарные пластины Mitsubishi TURNING INSERT _ CEMENTED CARBIDE UTi grades are available for steel and cast iron. HTi grades are available for non-ferrous and non-metal materials and are also suitable for cast iron. SELECTION STANDARD TURNING Обрабатываемые материалы Work Material Steel Recommended Grade Recommended Скорость резания (м/мин) Cutting Speed (m/min) ISO Application Range UTi20T P10 100 (60-130) P20 P30 I a M Stainless Steel UTi20T M10 100 (60-130) M20 M30 I a Cast Iron HTi05T HTi 10 UTi20T 120 (80-150) K01 100 (50-150) K10 I % K20 100 (50-150) K30 Non-Ferrous Metal HTi10 N01 600 (400 - 800) N10 N20 N30 Heat-resistant Alloy Ti Alloy MT9005 RT9005 MT9015 RT9010 TF15 70 (50-100) S01 60 (40 - 80) S10 a S20 50 (40 - 70) S30 MAIN COMP ONENT and applicat ION ISO Main Component Characteristics Обрабатываемые материалы Work Material p M WC-TiC-TaC-Co Heat / deformation resistance. Carbon steel, alloy steel, stainless steel and cast iron K N WC-Co High rigidity and wear resistance. Cast iron, non-ferrous metals, and non-metal S WC-Co High heat resistance and wear resistance. Heat-resistant alloy, Ti alloy GRADE CHARACTERISTICS ISO Grade Hardness (HRA) Thermal Conductivity (W/nrK) Thermal Expansion (x10-6/K) Young's Modulus (GPa) T.R.S(GPa) p M UTi20T 90.5 38 5.5 520 2.0 N K HTi05T 92.5 79 4.5 600 1.5 HTi10 92.0 79 4.6 630 2.0 S MT9005/RT9005 92.2 79 4.5 600 2.0 MT9015/RT9010 92.0 79 4.6 630 2.2 TF15 91.5 71 5.3 580 2.5 1GPa=102kg/mm2,1 W/m K=2.39 10-3cal/cm sec °C Mitsubishi Materials 67 TURNING INSERT