Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS

Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS

Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS _ TAPER RADIUS BALL SQUARE carbide Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS _ CRIM4JC Рекомендуемые режимы резания при обработке на станке RECOMMENDED CUTTING CONDITIONS Work material Copper, Copper alloys Dia. Revdufin Feed nte DC mm (miir1 (niMn) 3 10600 280 4 8000 330 5 6400 380 6 5300 420 8 4000 460 10 3200 460 12 2700 460 <0.05DC (MAX. 0.5mm) 2.5DC If the depth of cut Is shallow, the revolution and feed rate can be Increased. The use of water-soluble coolant Is recommended. When drilling, please set the feed rate at 1/3 or below of the values above. If the rigidity of the machine or the work materials installation is very low, or chattering and noise are generated, reduce the revolution and feed rate proportionately. 844 Mitsubishi Materials