Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS

Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS

Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS _ TAPER RADIUS BALL SQUARE carbide Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS _ DF4JC Рекомендуемые режимы резания при обработке на станке RECOMMENDED CUTTING CONDITIONS Work material Graphite Copper, Copper alloys Dil. Revdution Feed rite Depth ol cut Width of cut Revolution Feed nte Depth of cut ffidth of cut DCfam (miir'l (mmlmin) (mm) (nm) (miir'l (mmMiinl im (mm 3 22000 2500 6 0.15 10600 280 6 0.15 4 18000 2900 8 0.2 8000 330 8 0.2 6 14000 3200 12 0.3 6400 380 12 0.3 8 10500 2900 16 0.4 4000 420 16 0.4 10 8700 2600 20 0.5 3200 460 20 0.5 12 7200 2200 24 0.6 2700 460 24 0.6 <0. 0. 5DC 1 2DC 1 When high machining accuracy is needed, or the workpiece becomes chipped, we recommend lowering the feed rate. Use a milling machine dedicated for graphite. If the rigidity of the machine or the work materials installation is very low, or chattering and noise are generated, reduce the revolution and feed rate proportionately. 1118 Mitsubishi Materials