314 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A310

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A310 0314 ENG Lab2u

WALTER Valenite Walter CaptoTM C PVQB Turning Internal machining Tool Walter CaptoTM ISO 26623 K 107°30‘ positive toolholder range internal machining lever type clamping f 4 / ", Dmin d2 f l4 l16 Dmin d2 f l4 l16 Designation k in mm Y As Type C3-PVQBR/L-13070-11 11 C3 0.984 0.787 0.512 2.756 2.087 25 20 13 70 53 0° -6° C3-PVQBR/L-15080-11 11 C3 1.063 0.787 0.591 3.150 2.520 27 20 15 80 64 0° -6° C4-PVQBR/L-13070-11 11 C4 0.984 0.787 0.512 2.756 1.850 25 20 13 70 47 0° -6° VB/VC..22 VB/VC 1103 C4-PVQBR/L-15080-11 11 C4 1.063 0.787 0.591 3.150 2.283 27 20 15 80 58 0° -6° C5-PVQBR/L-15080-11 11 C5 1.063 0.787 0.591 3.150 2.244 27 20 15 80 57 0° -6° C4-PVQBR/L-22110-16 16 C4 1.575 1.260 0.866 4.331 3.504 40 32 22 110 89 0° -8° C4-PVQBR/L-27120-16 16 C4 1.969 1.575 1.063 4.724 3.937 50 40 27 120 100 0° -8° C4-PVQBR/L-27080-16 16 C4 1.969 1.575 1.063 3.150 2.362 50 40 27 80 60 0° -8° C5-PVQBR/L-22110-16 16 C5 1.575 1.260 0.866 4.331 3.465 40 32 22 110 88 0° -8° C5-PVQBR/L-27140-16 16 C5 1.969 1.575 1.063 5.512 4.685 50 40 27 140 119 0° -8° VB/VC 33 C5-PVQBR/L-35100-16 16 C5 2.480 1.969 1.378 3.937 3.150 63 50 35 100 80 0° -7° VB/VC 1604 C5-PVQBR/L-35150-16 16 C5 2.480 1.969 1.378 5.906 5.118 63 50 35 150 130 0° -7° C6-PVQBR/L-22120-16 16 C6 1.575 1.260 0.866 4.724 3.701 40 32 22 120 94 0° -8° C6-PVQBR/L-27145-16 16 C6 1.969 1.575 1.063 5.709 4.724 50 40 27 145 120 0° -8° C6-PVQBR/L-35175-16 16 C6 2.480 1.969 1.378 6.890 5.984 63 50 35 175 152 0° -8° Measured with master insert VB 110304 / VB 160408. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs. see page A 453. Bodies and assembly parts are included in the scope of delivery. Assembly parts Type Dmin in (mm) VB/VC 22 VB/VC..1103.. 0.984 1.063 (25-27) VB/VC 33 VB/VC 1604 1.575 (40) VB/VC 33 VB/VC 1604 1.969 2.480 (50-63) /6/ Shim AP153 r < 0.8 Lever KN118 KN114 KN110 n Pipe pin RS101 -EM3 Clamping screw FS347 (SW 2) FS332 (SW 2.5) FS351 (SW 2.5) Tightening torque 5 in-lb (0.6 Nm) 22 in-lb (2.5 Nm) 18 in-lb (2.0 Nm) h> Assembly plug MD101 Allen key ISO2936-2 (SW 2) ISO2936-2.5 (SW 2.5) ISO2936-2.5 (SW 2.5) A 310