293 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A289

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A289 0293 ENG Lab2u

Turning Internal machining WALTER Valenite Walter Turn A STFC / E STFC 7° positive toolholder range internal machining screw clamping Tool Steel boring bar A Dmin d1 f h l1 Designation /vtA in Y As Type k 91° A06M-STFCR/L2 0.250 0.480 0.375 0.250 0.336 6.000 0° -10° TC..2(1.5).. TC..1102.. A08M-STFCR/L2 0.250 0.598 0.500 0.312 0.460 6.000 0° -7° A10R-STFCR/L2 0.250 0.770 0.625 0.406 0.562 8.000 0° -57° A12S-STFCR/L2 0.250 0.930 0.750 0.500 0.709 10.000 0° -3° A16T-STFCR/L3 0.375 1.201 1.000 0.640 0.906 12.000 0° -4° TC..3(2.5).. TC..16T3.. A20T-STFCR/L3 0.375 1.469 1.250 0.765 1.181 12.000 0° -8° A24T-STFCR/L3 0.375 1.760 1.500 0.890 1.374 12.000 0° -6° For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453. Measured with master insert TC 06T102 / TC 090204 / TC 110204 / TC 16T308. Bodies and assembly parts are included in the scope of delivery. A boring bar in steel version / E boring bar made of solid carbide TC..2(1.5).. TC..2(1.5).. TC..3(2.5).. TC..3(2.5).. Assembly parts Type TC..1102.. TC..1102.. TC..16T3.. TC..16T3.. Shank size inch 06-08 10-12 16 20-24 Clamping screw FS2067 FS2061 FS2063 FS2060 for insert (Torx 7IP) (Torx 7IP) (Torx 15IP) (Torx 15 IP) Tightening torque 8 in-lb 8 in-lb 27 in-lb 27 in-lb Shim AP317-TC1612 r < 1.2 Screw for shim FS2068 (SW 3.5) Torx key FS1490 FS1490 FS1465 FS1465 (Torx 7IP) (Torx 7IP) (Torx 15IP/SW 3.5) (Torx 15IP/SW 3.5)