235 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A231

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A231 0235 ENG Lab2u

Turning External machining WALTER Valenite Walter CaptoTM C SWLC 1 7 Walter CaptoTM ISO 26623 k 95° 95° I4 positive toolholder range external machining lever type clamping Tool l4 dmin dmin2 f l4 dmin dmin2 Designation di in mm Y As Type C3-SWLCR/L-22040-06 6 C3 0.866 1.575 5.906 4.567 22 40 150 116 0° 0° WC 3(2.5) WC 06T3 C4-SWLCR/L-27050-06 6 C4 1.063 1.969 5.906 5.512 27 50 150 140 0° 0° C5-SWLCR/L-35060-06 6 C5 1.378 2.362 5.906 6.496 35 60 150 165 0° 0° C5-SWLCR/L-35060-08 8 C5 1.378 2.362 5.906 6.496 35 60 150 165 0° 0° WC 43 WC 0804 C6-SWLCR/L-45065-08 8 C6 1.772 2.559 5.906 7.480 45 65 150 190 0° 0° -t Measured with master insert WC 3(2.5)2 (06T308) / WC 432 (080408). Bodies and assembly parts are included in the scope of delivery. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453. For information on Dmin and Dmin2, see page A 453. Assembly parts WC 3<25) WC 43 Type WC 06T3 WC 0804 lit Clamping screw T for insert Tightening torque FS2063 (Torx 15IP) 27 in-lb (3.0 Nm) FS2065 (Torx 15IP) 27 in-lb (3.0 Nm) Shim AP318-WC0608 AP320-WC0812 Screw for shim FS2068 (SW 3.5) FS2069 (SW 4) c Torx key FS1465 (Torx 15IP/SW 3.5) FS1496 (Torx 15IP/SW 4) Cooling lubricant nozzle C3 FS1477 Cooling lubricant nozzle C4 FS1477 Cooling lubricant nozzle C5 FS1476 FS1476 Cooling lubricant nozzle C6 FS1476