218 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A214

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A214 0218 ENG Lab2u

WALTER Valenite Turning External machining Walter CaptoTM C DDUN negative toolholder range external machining rigid clamping system Tool Walter CaptoTM ISO 26623 K 93° Designation f in u in umin in Dmin2 in f l4 D mm min Dmin2 mm Type C4-DDUNR/L-27050-15 15 C4 1.969 1.969 4.331 5.512 27 50 110 140 -6° -7° DN 44 DN .1506. C5-DDUNR/L-35060-15 15 C5 2.362 2.362 4.331 6.496 35 60 110 165 -6° -7° C6-DDUNR/L-45065-15 15 C6 2.559 2.559 4.331 7.480 45 65 110 190 -6° -7° C8-DDUNR/L-55080-15 15 C8 3.150 3.150 4.331 9.843 55 80 110 250 -6° -7° Measured with master insert DN 442 (150608). Bodies and assembly parts are included in the scope of delivery. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453. For information on Dmin and Dmin2, see page A 453. Y X s Assembly parts J Type Shim Screw for shim Clamp Screw for clamp Tightening torque Pressure spring Pin Torx key Cooling lubricant nozzle C4 Cooling lubricant nozzle C5 Cooling lubricant nozzle C6 Cooling lubricant nozzle C8 DN..44.. DN 1506 AP304-DN15 FS1461 (Torx 15IP) PK243 FS1473 (Torx 15IP) 35 in-lb (3.9 Nm) FS1471 RS117 FS1465 (Torx 15IP/SW 3.5) FS1477 FS1476 FS1476 FS1479 Accessories Type DN 44 DN 1506 A 214