Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS

Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS

Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS _Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS _MB40B0 SINTERED ALLOY MACHINING Full face CBN Full face CBN insert can be used for chamfering that use higher depth of cut Range of use Range use Full face CBN CUTTING PERFORMANCE Continuous cutting of high density sintered alloy Hardness of Workpiece Workpiece High density sintered alloy Insert: NP-CNGA120408 Cutting Speed 190m/min Feed 0.15mm/rev Depth of Cut: 0.1mm Wet Cutting Continuous cutting of sintered alloy 2.0 i - 1.0 (0 TJ n 0.5 c Previous coated grade A Fracture k Fracture Previous I grade B 17 102 34 51 68 85 Hardness of Workpiece Workpiece Sintered alloy Insert: NP-CNGA120408 Cutting Speed 100m/min Depth of Cut: 0.1mm Wet Cutting Feed: 0.15mm/rev APPLICATION EXAMPLE Insert N P-TNGA160404SF3 NP-CNGA120404SE2 CCGW060204FS Workpiece \ \ 0 f/oj Carburized and quenched alloy Carburized and quenched alloy y1- FC250 Component Variable valve parts Variable valve parts Crankcase (0 II di o Скорость резания (м/мин) Cutting Speed (m/min) 250 250 400 450 Подача (мм/оборот) Feed (mm/rev) 0.1 0.12 0.03 >0.37 Глубина резания (мм) Depth of Cut (mm) 0.2 0.2 0.13 Coolant Wet cutting Wet cutting Wet cutting 200 400 (pieces) 150 300 450 Result MB4020 Previous coated grade MB4020 Previous coated grade 200 400 (Pieces) MB4020 Previous coated grade 208 Mitsubishi Materials