Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS

Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS

Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS _Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS _BC8105 Highest Accuracy FEATURES Use of a CBN substrate with excellent wear resistance and chipping resistance, together with a high-lubricity coating film, controls the occurrence of boundary wear and exhibits outstanding surface roughness. Surface Finish Insert NP-DNGA150608GS2 Обрабатываемые материалы Work Material JIS SMn433 (60HRC) Machining Methods External Continuous Cutting Cutting Speed vc (m/min) 176 Feed f (mm/rev) 0.09 Depth of Cut ap (mm) 0.15 Cutting Mode Wet (Emulsion) BC8105 can maintain excellent surface roughness. Number of Workpieces (pcs) Рекомендуемые режимы резания при обработке на станке RECOMMENDED CUTTING CONDITIONS Обрабатываемые материалы Work Material Machining Methods Cutting Speed vc (m/min) 50 100 200 Hardened Steel External Continuous (Heat Treated Steel etc) Cutting 300 400 f (mm/rev) ap (mm) Cutting Mode <0.15 <0.2 Dry, Wet BCBlia High Speed Turning FEATURES Use of a CBN substrate with excellent wear resistance and chipping resistance, together with an extremely hard coating film, provides the highest flank wear resistance of the entire BC81 series. For Continuous Cutting Covers a wide application range for continuous cutting Tool Life (Flank Wear) Insert NP-CNGA120408GS2 Обрабатываемые материалы Work Material JIS SCr420 (60HRC) Machining Methods External Continuous Cutting Cutting Speed vc (m/min) 250 Feed f (mm/rev) 0.10 Depth of Cut ap (mm) 0.2 Cutting Mode Dry Achieves long tool life for continuous cutting of hardened steel. Cutting Time (min) Рекомендуемые режимы резания при обработке на станке RECOMMENDED CUTTING CONDITIONS Обрабатываемые материалы Work Material Machining Methods Cutting Speed vc (m/min) 50 100 200 f (mm/rev) ap (mm) Cutting Mode 300 400 Hardened Steel External Continuous (Heat Treated Steel etc) Cutting <0.20 <0.35 Dry, Wet 202 Mitsubishi Materials