Фрезы Mitsubishi со сменными режущими пластинами INDEXABLE MILLING

Фрезы Mitsubishi со сменными режущими пластинами INDEXABLE MILLING

Фрезы Mitsubishi со сменными режущими пластинами INDEXABLE MILLING _ AXD7aaa RAMPING/HELICAL CUTTING RAMPING HELICAL CUTTING RAMPING/HELICAL CUTTING (ALUNIMIUM ALLOY) Type DC (mm) RE (mm) Ramping RMPX , . 1 (mm) 32 0.8 - 2.4 19° 61 3,3.2 18° 65 40 0.8 - 2.4 14° 85 3, 3.2 13° 91 50 0.8 - 2.4 10° 120 A type 3, 3.2 9° 133 63 0.8 - 2.4 8° 150 3, 3.2 7° 172 80 0.8 - 2.4 6° 200 3, 3.2 5° 241 100 0.8 - 2.4 4° 301 3, 3.2 4° 301 125 0.8 - 2.4 3° 401 3, 3.2 3° 401 B type 32 4,5 18° 63 40 4,5 11° 105 50 4,5 8° 146 63 4,5 6° 195 80 4,5 4° 292 100 4,5 3° 390 125 4,5 2° 585 (DH) Type DC (mm) RE (mm) Helical Milling DH min. (mm) P max. (mm) 32 0.8 - 2.4 41 8 3, 3.2 41 7 40 0.8 - 2.4 57 10 3, 3.2 57 9 50 0.8 - 2.4 77 12 A type 3, 3.2 77 11 63 0.8 - 2.4 103 13 3, 3.2 103 12 80 0.8 - 2.4 137 14 3, 3.2 137 12 100 0.8 - 2.4 177 14 3, 3.2 177 13 125 0.8 - 2.4 227 15 3, 3.2 227 13 32 4 41 7 5 41 6 40 4 57 9 5 57 8 50 4 77 10 5 77 9 63 4 103 10 B type 5 103 10 80 4 137 11 5 137 10 100 4 177 11 5 177 10 125 4 227 11 5 227 11 (Note) The recommended ramping feed is 0.05mmAooth or under. 1 L (Max. Depth of Cut =15/ tan a). Cutters' moving distance until depth of cut reaches APMX at a maximum ramping angle. Maximum depth of cut A type is 21mm, B type is 20.4mm. 2 The maximum diameter when machining a blind hole with a flat face using a corner radius of 0.8mm for A type and 4mm for B type. Other than that, find with the below formula. (cutting edge diameter DC) (comer radius) 0.3 2 3 The minimum diameter when machining a blind hole with a flat face using a corner radius of 0.8mm for A type and 4mm for B type. Other than that, find with the below formula. (cutting edge diameter DC) (comer radius) (Width of wiper edge BS) 0.1 2 Max. Drilling Depth (Alunimium Alloy) Type Insert corner radius RE (mm) Max. Drilling Depth (mm) Type A 0.8-2.4 5 3, 3.2 4.5 Type B 4 4 5 3.5 AXD7000 can be effectively used for pocket machining without the need for a prepared hole. 1476 Mitsubishi Materials