148 Каталог HOFFMANN GROUP 2020 Промышленные средства индивидуальной защиты Стр.148

Каталог HOFFMANN GROUP 2020 Средства индивидуальной защиты Стр. 148 0148 Lab2u

Hoffmann Group 51 HAND PROTECTION Standards: The basic requirements for protective gloves are regulated by DIN EN 420. This standard specifies the following points for all protective gloves: The relevant testing method to be used The general requirements for the design rules Glove manufacturing Resistance of the glove material to water penetration Harmlessness together with comfort and performance characteristics Marking and information supplied (by the manufacturer) DIN EN 420 must be used in conjunction with the following specific product standards: EN 388 Protection against mechanical risks EN 407 Protection against heat EN 511 Protection against cold EN 374 Protection against chemicals and micro-organisms EN 12477 Protection against heat and mechanical risks during welding EN 16350 Protection against mechanical risks EN 60903 Insulating protective gloves for working on live electrical systems EN ISO 10819 Protection against mechanical vibration and impacts Satisfaction of the PPE regulations (EU) 2016/425 Category I Gloves of simple design for protection against minimal risks Gloves of simple design - (for example, household gloves) must be tested and certified by manufacturers themselves. only for minimal risks Category II Gloves of intermediate design - for intermediate risks Gloves to protect against intermediate risk (for example, gloves for general work with good cut, abrasion and puncture resistance) must be tested and certified by an independent accredited certification body („notified body”). Only these accredited certification bodies are entitled to issue a CE mark, without which the gloves may not be sold. Name and address of the accredited certification body must be included in the glove packaging. Category III Gloves of complex design - for irreversible or fatal risks Gloves for protection against fatal or irreversible risks (for example, chemicals), must also be tested and certified by an accredited certification body. In addition, the quality assurance procedures used to guarantee the homogeneity of its production or testing of the uniform quality of the end product by the manufacturer must be checked by an independent body. Classification of work gloves: EN 407 EN 12477 148 SGD